GE UK-KIT-3S Problem, Possible Causes, What To Do, or “shrink”, to icemaker on some models

www.GEAppliances.com

Problem	Possible Causes	What To Do
Ice cubes stick together	Ice not being used often enough. • Empty ice cube bucket more frequently.
or “shrink”

Ice forms in inlet tube Water pressure is too low.

to icemaker

(on some models)

•Low water pressure can cause valve to leak. Water pressure must be between 20 and 100 psi to function properly.

A minimum pressure of 35 psi is recommended for units with water filters.

Freezer compartment is	• Turn the temperature control to a cooler setting. See the
too warm.	controls section in your refrigerator’s Owner’s Manual.

Unit is leaking water	Unapproved plastic tubing
	was used to complete water
	connection.

•Use only copper tubing or plastic tubing from a GE SmartConnect™ Refrigerator Tubing Kit. The only GE approved plastic tubing is that supplied in GE SmartConnect™ Refrigerator Tubing Kits. Do not use any other plastic water supply line because the line is under pressure at all times. Other types of plastic will crack or rupture with age and cause water damage to your home. GE is not responsible for property damage due to improper installation of water connection.

Water pressure is too low.

•Check house water pressure. Water pressure must be between 20 and 100 psi to function properly. A minimum pressure of 35 psi is recommended for units with water filters.

Improper water valve installation. • Check water connection procedure in these Installation Instructions. Self-piercing and saddle valves cause low water pressure and may clog the line over time.

5