GE ZIF36NM dimensions Installation at End of Run, Refrigerator and Freezer installed side-by-side

Monogram.“

ZIF36NM – GE Monogram 36" Built-In All-Freezer

Installation at End of Run

	1/2" Thick
	Side Panels
Finished Dim.	36"
Roughed-In Dim.	37"

Refrigerator

Cabinet

Refrigerator Door

Cabinet

Refrigerator and Freezer installed side-by-side

	1/2" Thick
	Side Panels
Finished Dim.	72"

Rough-In Dim. 73"

	1/4" Thick
	Side Panels
Finished Dim.	71 1/2"
Rough-In Dim.	72"

Note: 1/2" thick side panels shown. Side panels can be any thickness. Add side panel thickness to outside trim width (36" or 72" for two models) to calculate the rough-in dimension. The leading (front) edge must be finished to match surrounding cabinetry.

Side-By-Side Installation of Freezer and Refrigerator

84"

36"

24-3/4" 36"

					*Finished Width
			2 1/2"					28 1/2"	Wall View
					Electrical
					6"	6"
	5"
						5"
84 1/2" max		24 3/4" Total							75" From Floor
83 1/2" min		Depth							to Bottom
Finished									of Electrical
Opening									Area
	5" Water Supply
3 1/2"	26"
				Freezer			Refrigerator

For a complete food storage center, install a Monogram Freezer and Refrigerator side-by-side. For even more capacity, install two refrigerators and/or two freezers.

•Order ZUG75 Unified Grille Panel Kit for one continuous 3/4" custom grille panel.

•The electrical and water locations must be located as shown for either type of installation. A separate 115V, 60Hz., 20 amp power supply is recommended for each product.

Specification Revised 4/05 110156

*72" min. for a flush installation 71-1/2" min. for a semi-flush installation

Note: Additional cutout width may be required when side panels are used. Add side panel thickness to the finished cutout to calculate rough-in width.

		For answers to your Monogram,® GE Profile™ or
	Listed by	GE appliance questions, visit our website at
	Underwriters	GEAppliances.com or call
R	Laboratories	GE Answer Center® service, 800.626.2000.