GE ZIF36NM dimensions Semi-Flush Installation, Side Panel Requirements

Monogram.“

ZIF36NM – GE Monogram 36" Built-In All-Freezer

Design Information

Flush or Semi-Flush Enclosure Installation

True Flush Installation Semi-Flush Installation

0"

True Flush Installation
In a flush installation,
the freezer doors
will align evenly
with the front face
of adjacent cabinet
doors. The freezer
blends into the	3/4"
surrounding cabinetry.

Semi-Flush Installation These freezers can also be installed semi-flush into an enclosure using the minimum cutout width. The case trim creates a frame around the opening.

Monogram built-in refrigerators and freezers can be installed flush with typical 24-3/4" deep cabinetry.

When installed semi-flush, the case trim will conceal slight gaps around the enclosure. The refrigerator will project forward approximately 3/4" beyond the front face of surrounding cabinetry.

Side Panel Requirements:

•Side panels are not required whenever the refrigerator or freezer is installed into an enclosure or between pantry and oven cabinets.

•Side panels are required whenever the sides of the product are exposed.

•Side panel sizes vary depending on the type of installation being made.

To accomplish an attractive installation, you must:

1.Determine the need for side panels.

2.Determine side panel thickness.

3.Order matching side panels from the cabinet manufacturer. Be sure to provide the exact dimensions.

Specification Revised 4/05 110156

R

	For answers to your Monogram,® GE Profile™ or
Listed by	GE appliance questions, visit our website at
Underwriters	GEAppliances.com or call
Laboratories	GE Answer Center® service, 800.626.2000.