Install Tubular Stainless Steel Handles Onto Panels

STEP 2 INSTALL TUBULAR STAINLESS STEEL HANDLES ONTO PANELS

Drill Pilot Holes

•Measure, mark and draw a line, 1-1/8" from the handle side edge, top to bottom.

•Hold the tubular handle against the appearance side, centered top to bottom and on the marked line.

•Mark the screw hole locations at the center of the handle attachment posts. Place handle over the marks to check again that holes are aligned to handle posts.

•Center punch to mark hole locations. Drill 7/32" pilot holes from the appearance side and through the entire panel thickness.

•Follow the same procedure to drill pilot holes on the freezer door.

Drill

Pilot

Holes

Match

Handle

1-1/8"

Fresh Food Panel

Freezer Drawer

Panel

1-1/8"

CAUTION: Hole locations must be exact to accept handle standoff and handle assembly.

Assemble Handles

•Place a handle standoff on each attachment post on the handle. Position the screw hole on the standoff to point to the floor.

	• Install set screws into the bottom of each standoff,	Screw
	using the Allen wrench provided. The standoff should	Attachment Post
	using the Allen wrench provided. The standoff should	Allen Wrench
	be tight against the handle.	Allen Wrench
	be tight against the handle.

Secure Handles to Panels

•Use a 7/8" spade bit to drill 1/2" to 9/16" max. depth into the back side of the panel. At this depth there will be enough screw threads to engage the handle on the appearance side. See illustration.

•Stand the panel up on the hinge side. Place a plastic spacer into the 7/8" opening, drop screw through

	the spacer.	7/8"
		7/8"
		Plastic
		Spacer
		1.100"
	1/2" Min.	3/4"
	9/16" Max.	3/4"
	9/16" Max.
		7/32"

Countersink screw into panel as shown.

•Place handle standoffs against the mounting screws on the appearance side, drive top screw partially into the standoff.

•Drive next screw partially into the standoff. Continue installing screws to the bottom location. Alternate back to the top tightening screws one at a time until the handle is tight against the panel.

-2-

ZKHCSS2 specifications

The GE ZKHCSS2 is an advanced industrial automation controller designed to optimize processes in various sectors, including manufacturing, energy, and infrastructure. This controller is part of GE’s robust line of programmable logic controllers (PLCs), offering a perfect blend of reliability, scalability, and flexibility to meet diverse operational needs.

One of the standout features of the GE ZKHCSS2 is its modular architecture. This design allows users to customize the controller according to specific application requirements, enabling the addition of various input/output modules, communication interfaces, and specialty functions. The modular setup not only enhances performance but also simplifies maintenance and upgrading, ensuring the controller can evolve alongside technological advancements.

Equipped with advanced processing power, the ZKHCSS2 boasts real-time data handling capabilities, facilitating quick decision-making and response times crucial for high-speed automation tasks. This model supports a wide range of I/O options, accommodating both digital and analog signals, thus ensuring compatibility with numerous field devices and sensors.

Communication is another key component of the GE ZKHCSS2. It supports several communication protocols, including Ethernet/IP, Modbus TCP, and Profibus, allowing for seamless integration with existing systems and devices. This interoperability ensures that the ZKHCSS2 can effectively communicate with various plant-level systems, enhancing overall operational efficiency.

In terms of software, the GE ZKHCSS2 is compatible with GE’s extensive suite of automation solutions, including the Proficy machine automation software. This software empowers users to create sophisticated control algorithms, perform real-time monitoring, and implement various data analytics functions, ultimately enabling a more proactive approach to maintenance and optimization.

Reliability and scalability are further reinforced by the ZKHCSS2’s rugged design, capable of withstanding harsh industrial environments. It includes features such as extended temperature ranges, resistance to electromagnetic interference, and fault-tolerant operations, ensuring continuous operation under challenging conditions.

Moreover, the GE ZKHCSS2 places a strong emphasis on security to protect critical infrastructure. It incorporates advanced cybersecurity features that safeguard against unauthorized access and cyber threats, ensuring the integrity of the control system.

In summary, the GE ZKHCSS2 represents a state-of-the-art solution for industrial automation needs, characterized by its modularity, robust communication capabilities, real-time data processing, and strong security measures. With its ability to adapt to evolving technology and maintain high operational standards, the ZKHCSS2 is a formidable tool for businesses aiming to enhance efficiency and reliability in their automation processes.