GE FUM5, FCM7, FCM15, FCM25 owner manual Troubleshooting Tips, Consumer Support

Page 4

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

Instructions Operating Instructions

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

If the outlet is a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The freezer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your freezer by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the freezer away from the wall, be careful not to roll over or damage the power cord.

Installation

USE OF ADAPTER PLUGS (Adapter plugs not permitted in Canada)

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

Troubleshooting Tips

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the freezer until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Consumer Support

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Food Freezers Model number Serial numberSafety Precautions Before You Throw Away Your Old Refrigerator or Freezer CFC DisposalTroubleshooting Tips Consumer SupportTemperature Control Safety Instructions OperatingAbout the operation of your freezer Power-On Light on some models Key-Ejecting Lock on some modelsRefrigerated Cabinet Shelves on some models From the freezerSafety InstructionsDefrosting instructions. for Manual Defrost models For Complete DefrostingCleaning Your Freezer Care and cleaning of the freezerTo Remove the Freezer Door on Upright models Safety Instructions Preparing to MovePreparing for Vacation Is recommendedOperating Instructions Safety Instructions Preparing to install the freezerAdjustable Legs on Upright models Normal operating characteristics Before you call for service…Foods defrosting Too coldMoisture forms on Outside of cabinetWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Replace Freezer WarrantyWhat GE Will Not Cover Schedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio

FUM5, FCM7, FCM15, FCM25 specifications

General Electric (GE) has made significant strides in the field of industrial technology with its advanced lineup of vertical turbine pumps, particularly the FUM5, FCM7, FCM15, and FCM25 models. These pumps are designed to meet the demanding needs of a wide range of applications, including water transfer, irrigation, and industrial processes.

The GE FUM5 model stands out for its robust design and efficiency. This pump features a multi-stage configuration, which allows for high-pressure performance in demanding environments. Its innovative hydraulic design minimizes energy consumption while maximizing flow rates. The FUM5 is engineered with high-quality materials, ensuring longevity and reliability, making it a preferred choice for agricultural and municipal applications.

Moving on to the FCM7, this model enhances versatility in its operational capabilities. The FCM7 is equipped with a unique impeller design that allows for better handling of varying fluid properties. This capability makes it suitable for applications involving contaminated water or fluids with a high solid content. The FCM7 is also designed with advanced sealing technologies to reduce maintenance requirements and increase operational uptime.

The FCM15 model takes efficiency to another level. It incorporates smart technology to provide real-time monitoring and diagnostics, allowing users to optimize performance and reduce energy costs. The FCM15’s advanced control systems adjust flow rates and pressures based on system demands, enabling it to adapt to dynamic operating conditions. This adaptability is pivotal in sectors such as oil and gas, where demands can fluctuate rapidly.

Lastly, the FCM25 model focuses on high-capacity applications. With a significant pumping capacity, the FCM25 is ideal for large-scale water distribution and industrial applications. Its design integrates cutting-edge materials to ensure minimal wear and tear, enhancing durability under high workloads. The FCM25 also features noise-reduction technologies, making it suitable for installations in noise-sensitive environments.

Collectively, GE’s FUM5, FCM7, FCM15, and FCM25 pumps utilize the latest advancements in hydraulic and mechanical engineering. From enhanced efficiency and smart monitoring to robust designs capable of handling various fluid types, these models represent a comprehensive solution for diverse industrial and municipal needs. Their commitment to innovation, efficiency, and reliability underscores GE’s leadership in the field of industrial pump technology, driving productivity and reducing operational costs for users worldwide.
Top Page Image Contents