GE ZET3058, ZET3038, JT980, JT930 warranty Before YOU Begin, For Your Safety

Page 1

Installation Instructions

30” Built-In Trivection™ Wall Oven

JT930, JT980, ZET3038, ZET3058

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT — Save these

instructions for local inspector’s use.

•IMPORTANT — Observe all governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the Consumer.

•Note to Consumer – Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical and advanced electrical skills.

•Completion time – 1 to 3 hours

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

WARNING — This appliance must be properly grounded.

•ATTENTION INSTALLER

All electric wall ovens must be hard wired (direct wired) into an approved junction box. A plug and receptacle is NOT permitted on these products.

FOR YOUR SAFETY:

•Be sure your oven is installed properly by a qualified installer or service technician.

•Be sure the oven is securely installed in a cabinet that is firmly attached to the house structure. Weight on the oven door could cause the oven to tip and result in injury. Never allow anyone to climb, sit, stand or hang on the oven door.

•Make sure the cabinets and wall coverings around the oven can withstand the temperatures (up to 200°F) generated

by the oven.

WARNING: The electrical power to the oven supply line must be shut off while line connections are being made. Failure to do so could result in serious injury or death.

•To prevent damage to the door and to prevent excessive microwave leakage, do NOT remove the door on the single wall oven or the upper oven door on the double wall oven.

31-10663

1-07 JR

1

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Before YOU Begin For Your SafetyTools YOU will Need Prepare to Install the OvenParts Included Materials YOU MAY NeedDo not Lift the Oven by the Handle PRE-INSTALLATIONCutout Options for Single BUILT-IN Ovens Single BUILT-IN Oven Cutout OptionsMin Under COUNTER-SINGLE BUILT-IN Oven Option Cutout for Double BUILT-IN Oven Double BUILT-IN Oven CutoutOn Double Wall Oven MODELS, Remove the Lower Door only Remove the Lower Oven Door On Double Wall Oven Models onlyElectrical Requirements Electrical ConnectionsTurn OFF Electricity Electrical ConnectionsConnect Conduit THREE-CONDUCTOR Branch Circuit Connection Slide the Oven Into the Opening Secure the Oven in the OpeningDrill the Pilot Holes and Mount the Oven Install the Metal Bottom Trim On Double Wall Oven MODELS, Replace the Lower Door Replace the Lower Oven Door on Double Wall Oven ModelsPRE-TEST Checklist Final ChecklistsOperation Checklist
Related manuals
Manual 48 pages 32.89 Kb Manual 48 pages 63.99 Kb

JT930, JT980, ZET3058, ZET3038 specifications

General Electric (GE) has made significant strides in the power generation and industrial equipment sectors, and their models ZET3038, ZET3058, JT980, and JT930 are testament to this commitment to excellence. Each of these models offers a unique blend of features, technologies, and characteristics designed to meet the diverse needs of modern industries.

The GE ZET3038 is a robust turbine engine that excels in flexibility and efficiency. Its design incorporates advanced materials that enhance durability while minimizing weight. One of the outstanding features of the ZET3038 is its modular architecture, which allows for easy maintenance and upgrades. The engine is equipped with a state-of-the-art digital control system, providing real-time monitoring and optimization of performance. This capability reduces downtime and maximizes operational efficiency, making it an ideal choice for industries requiring reliable and consistent energy output.

Moving on to the GE ZET3058, this model builds on the strengths of the ZET3038 but offers enhanced power and efficiency. It features a larger turbine and advanced aerodynamic profiles, resulting in improved fuel efficiency and reduced emissions. The ZET3058 is known for its operational versatility, being suitable for both peaking and base-load operations. Its integrated diagnostic systems allow for predictive maintenance, which significantly extends the lifespan of the components and reduces overall operational costs.

The JT980 is one of GE's high-performance jet engines, designed primarily for commercial aviation. It boasts advanced combustion technologies that ensure lower NOx emissions, meeting stringent environmental regulations. The JT980 incorporates sophisticated electronic systems for enhanced fuel management and efficiency optimization, greatly improving operational economics for airlines. Its lightweight construction contributes to overall aircraft performance, enabling higher payload capacities and reduced fuel consumption.

Lastly, the JT930 engine is tailored for regional and business aviation markets. It features a compact design and employs the latest in materials technology to achieve a balance between performance and cost-efficiency. The JT930 is recognized for its quiet operation and low environmental impact, making it a favorable choice for operators concerned about sustainability. Its straightforward maintenance procedures ensure that aircraft downtime is kept to a minimum, allowing for more flights and increased revenue potential.

In summary, the GE ZET3038, ZET3058, JT980, and JT930 showcase a spectrum of innovative technologies and design philosophies aimed at delivering high performance, efficiency, and reliability across various applications. Each model reflects GE's commitment to advancing industrial capabilities through cutting-edge engineering solutions.
Top Page Image Contents