GE JT930, ZET3038, ZET3058, JT980 Double BUILT-IN Oven Cutout, Cutout for Double BUILT-IN Oven

Installation Instructions

DOUBLE BUILT-IN OVEN CUTOUT

3 CUTOUT FOR DOUBLE BUILT-IN OVEN

		Cutout Width
		28 1/2” Min		7” from side cutout
		28 5/8” Max.
All corners
must be cut
square
Allow
11/16” for
overlap of		Opening
oven over
		between	Required
side edges
		inside	Junction
of cutout
		walls must	Box Area
		be at Least
Allow a
		28 1/2”
minimum
		Wide
of 21” for					7”
clearance		Allow 1”
to adjacent
corners,		minimum for
drawers,		overlap of
			Cutout Height
walls, etc.		oven top and	51 13/16” Min.		25”
when door		1 1/4” overlap	51 15/16” Max.
is open		of oven bottom
		of cutout
	21”
				Recommended
		Cabinet		cutout location
				from floor 12”

	Width 30”
Cabinet Width	30”
Recommended
Cutout Location
from Floor	12”
Cutout Depth	23	1/2” Min.
Cutout Width	28	1/2” Min.
	28	5/8” Max.
Cutout Height	51	13/16” Min.
	51	15/16” Max.

NOTE: If the cabinet does not have a front frame and the sides are less than 3/4” thick, shim both sides equally to establish the cutout width.

3CUTOUT FOR DOUBLE BUILT-IN OVEN (CONT.)

If the cabinet does not have a solid bottom, two braces or runners must be installed level with the bottom of the cutout to support the weight of the oven. For double ovens, the runners and braces must support 375 lbs.

The solid bottom or runners must be level with the bottom of the cutout or the bottom trim may not install correctly and then interfere with the door opening.

L	2” x 4” or
C
	equivalent
	runners
	level with
	bottom of
	cutout
Suitable
Bracing to
Support
Runners

215/8”

Over Centerline

of Cabinet

7