GE ZET3038, ZET3058 Single BUILT-IN Oven Cutout Options, Cutout Options for Single BUILT-IN Ovens

Installation Instructions

SINGLE BUILT-IN OVEN CUTOUT OPTIONS

2CUTOUT OPTIONS FOR SINGLE BUILT-IN OVENS

Skip to Step 3 for Double Built-In Oven models.

There are 4 installation options for single built-in ovens. Choose the appropriate one for your application:

AWALL MOUNT—SINGLE BUILT-IN OVEN OPTION

BWALL MOUNT—SINGLE BUILT-IN OVEN BELOW AN ADVANTIUM™ OVEN OPTION

CWALL MOUNT—SINGLE BUILT-IN OVEN ABOVE A WARMING DRAWER OPTION

DUNDER COUNTER—SINGLE BUILT-IN OVEN OPTION

		WALL MOUNT—SINGLE BUILT-IN OVEN
	A
		OPTION
						3 1/2”
					Cutout Width			7”
					28 1/2” Min
					28 5/8” Max.
	All corners must
	be cut square
							Required Junction
							Box Area
Allow 11/16” for					Opening
overlap of oven
over side edges					between
of cutout					inside walls
									6”
					must be
					at Least
								Cutout Height
					28 1/2”			27 1/4” Min.		12”
					Wide			27 5/16” Max.
			21”
							Recommended
				Allow 1” minimum			cutout location
							from floor
				for overlap of oven
							32 1/2”
Allow a minimum of					to and 1 1/4”
21” for clearance to				overlap of oven
				bottom of cutout
adjacent corners,
drawers, walls, etc.
when door is open					Cabinet
					Width 30”
Cabinet Width					30”
Recommended
Cutout Location
from Floor					32 1/2”
Cutout Depth					23 1/2” Min.
Cutout Width					28 1/2” Min.
					28 5/8” Max.
Cutout Height					27 1/4” Min.
					27 5/16” Max.						4

AWALL MOUNT—SINGLE BUILT-IN OVEN OPTION (CONT.)

NOTE: If the cabinet does not have a front frame and the sides are less than 3/4” thick, shim both sides equally to establish the cutout width.

If the cabinet does not have a solid bottom, two braces or runners must be installed level with the bottom of the cutout to support the weight of the oven. For single ovens, the runners and braces must support 225 lbs.

The solid bottom or runners must be level with the bottom of the cutout or the bottom trim may not install correctly and then interfere with the door opening.

L	2” x 4” or
C
	equivalent
	runners
	level with
	bottom of
	cutout
Suitable
Bracing to
Support
Runners

215/8”

Over Centerline

of Cabinet

NOTE: This oven is not approved for stackable or side by side installation.