GE SESO732 quick start Convenience Features

Page 10

OPERATING INSTRUCTIONS

Time Features (cont .)

Add 30 Seconds

It will add 30 seconds to the time counting down each time the pad is pressed.

Each touch will add 30 seconds, up to 99 minutes and 99 seconds.

The oven will start immediately when pressed.

Convenience Features

Popcorn

How to Use the Popcorn Feature

2. Press POPCORN once for a 3.5-ounce

1. Follow package instructions. Place

package of popcorn and twice for a

3.0-ounce package. The oven will

the package of popcorn in the center

start immediately after POPCORN

of the microwave.

is touched.

 

Use only with prepackaged microwave popcorn weighing 3.0 to 3.5 ounces.

Beverage

The Beverage feature works best for heating a beverage that is at room temperature.

Press BEVERAGE once for 8 oz., twice for 12 oz., three times for 16 oz. and four times for 4 oz. The oven will start immediately when BEVERAGE is touched.

Beverages heated with the Beverage feature may be very hot. Remove the container with care.

Reheat

The Reheat feature automatically sets the cooking times and power levels to reheat a variety of previously cooked foods.

1.Press REHEAT. CodE will be displayed.

2.Select food type 1–6. Serving Sizes 1–4 will be displayed.

3.Enter Serving Size 1–4.

4.The oven starts automatically.

Food

 

Serving

Code

Food

Size

1

Pasta

1–4

2

Meats

1–4

3

Veggies

1–4

4

Beverages

1–4

5

Sauces

1–4

6

Plate (of leftovers)

1 only

Vegetable

The Vegetable feature automatically sets the cooking times and power levels to cook fresh, frozen or canned vegetables.

1.Press VEGETABLE. CodE will be displayed.

2.Select food type 1–3. Serving Sizes 1–4 will be displayed.

3.Enter Serving Size 1–4.

4.The oven starts automatically.

10

Food

 

Serving

Code

Food

Size

1

Fresh

1–4

2

Frozen

1–4

3

Canned

1–4

Image 10
Contents Operating Instructions Microwave Oven WarrantyHelpful Information Safetyoperatinginstructions Special Notes about Microwaving Special Notes about Follow these guidelinesAdapter Plugs Convenience Features and Auto Feature FeaturesTime Features Controls on Your Microwave OvenPower Level Best Uses Changing Power LevelsTime Features Time CookVegetable Amount Time Comments AsparagusFood Time Comments Time DefrostDefrosting Guide Press Time DefrostConvenience Features Baked Potato Auto FeaturePizza Auto DefrostOther Features Microwave Terms Care and CleaningHow to Clean the Inside Helpful HintsCase How to Clean the OutsidePower Cord Control Panel and DoorWhat GE Will Not Cover Order to Make a Warranty ClaimFor The Period What GE Will Provide One YearConsumer Support Ge.com

SESO732 specifications

The GE SESO732 is an advanced energy meter designed for efficient monitoring and management of electrical systems in industrial and commercial applications. This device stands out due to its robust features and cutting-edge technologies, making it a valuable asset for operators aiming to optimize energy usage and ensure compliance with energy regulations.

One of the primary features of the GE SESO732 is its high-accuracy measurement capability. It provides precise readings of voltage, current, power, and energy, enabling users to monitor their energy consumption accurately. This accuracy is vital for industries where energy costs significantly impact operational efficiency and profitability.

The SESO732 incorporates advanced connectivity options. Its built-in communication protocols, including Modbus and Ethernet, allow for seamless integration into existing control systems. This connectivity facilitates real-time data transmission, enabling facility managers to access critical information remotely and make informed decisions promptly.

In addition to basic measurement functions, the meter has powerful data logging capabilities. It can store historical data for various electrical parameters, allowing users to analyze trends over time. This feature is essential for identifying inefficiencies and areas for improvement, contributing to enhanced energy management strategies.

Safety is also a top priority for the GE SESO732. The device is designed to meet stringent international standards, equipped with protection features to prevent overload and ensure safe operation. Furthermore, the meter supports advanced surge protection to safeguard against electrical faults, prolonging the lifespan of both the meter itself and the connected equipment.

Another remarkable characteristic of the GE SESO732 is its user-friendly interface. The large display provides clear readings, and the intuitive navigation allows users to access different features effortlessly. Additionally, its compact design facilitates easy installation in various environments, whether mounted on a control panel or integrated within a larger electrical system.

Overall, the GE SESO732 is a sophisticated energy metering solution that combines high accuracy, advanced connectivity, comprehensive data logging, and robust safety features. Its design reflects GE's commitment to innovation in energy management technology, making it an ideal choice for businesses looking to enhance their energy efficiency and reduce operational costs. As industries worldwide increasingly focus on sustainability and performance, devices like the SESO732 will play a crucial role in achieving these goals.