Safetyoperatinginstructions

IMPORTANT SAFETY INFORMATION.

READ ALL SAFETY INFORMATION BEFORE USING.

PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, or to prevent property damage, personal injury or loss of life.

Do Not Attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.

Do Not Place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces.

Do Not Operate the oven if it is damaged. It is particularly important that the oven door close properly and that there is no damage to the:

1door (bent),

2hinges and latches (broken or loosened),

3 door seals and sealing surfaces.

The Oven Should Not be adjusted or repaired by anyone except properly qualified service personnel.

WARNING!

To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy:

SAFETY PRECAUTIONS

This microwave oven is not approved or tested for marine use.

•Read and follow the specific “Precautions to Avoid Possible Exposure to Excessive Microwave Energy” above.

•This appliance must be grounded. Connect only to properly rounded outlet . See Grounding Instructions section on page 4.

•Install or locate this appliance only in accordance with the provided Installation Instructions.

•Be certain to place the front surface of the door three inches or more back from the countertop edge to avoid accidental tipping of the appliance in normal usage.

•Do not store anything directly on top of the microwave oven surface when the oven is in operation.

•Use this appliance only for its intended use as described in this manual. Do not use corrosive chemicals or vapors in this appliance. This microwave oven is specifically designed to heat, dry or cook food and is not intended for laboratory or industrial use.

•Do not operate this appliance if it has a damaged power cord or plug, if it is not working properly or if it has been damaged or dropped.

•Do not cover or block any openings on the appliance.

•Do not store this appliance outdoors. Do not use this product near water—for example, in a wet basement, near a swimming pool, near a sink or in similar locations.

•Keep power cord away from heated surfaces.

•Do not immerse power cord or plug in water.

•Do not let power cord hang over edge of table or counter.

•To reduce the risk of fire in the oven cavity:

—Do not overcook food. Carefully attend appliance when paper, plastic or other combustible materials are placed inside the oven while cooking.

—Remove wire twist-ties and metal handles from paper or plastic containers before placing them in the oven.

—Do not use the oven for storage purposes. Do not leave paper products, cooking utensils or food in the oven when not in use.

—If materials inside oven ignite, keep the oven door closed, turn the oven off and disconnect the power cord, or shut off power at the fuse or circuit breaker panel. If the door is opened, the fire may spread.

•See door surface cleaning instructions in the Care and Cleaning section(s) of this manual.

•GE does not support any servicing of the microwave. We strongly recommend that you do not attempt to service the microwave yourself.

•As with any appliance, close supervision is necessary when used by children.

•This appliance shall not be installed less than 36″ above the floor to the bottom of the product . A minimum spacing of 3″ must be

maintained between the microwave oven and the sidewalls.

SAVE THESE INSTRUCTIONS

SESO732 specifications

The GE SESO732 is an advanced energy meter designed for efficient monitoring and management of electrical systems in industrial and commercial applications. This device stands out due to its robust features and cutting-edge technologies, making it a valuable asset for operators aiming to optimize energy usage and ensure compliance with energy regulations.

One of the primary features of the GE SESO732 is its high-accuracy measurement capability. It provides precise readings of voltage, current, power, and energy, enabling users to monitor their energy consumption accurately. This accuracy is vital for industries where energy costs significantly impact operational efficiency and profitability.

The SESO732 incorporates advanced connectivity options. Its built-in communication protocols, including Modbus and Ethernet, allow for seamless integration into existing control systems. This connectivity facilitates real-time data transmission, enabling facility managers to access critical information remotely and make informed decisions promptly.

In addition to basic measurement functions, the meter has powerful data logging capabilities. It can store historical data for various electrical parameters, allowing users to analyze trends over time. This feature is essential for identifying inefficiencies and areas for improvement, contributing to enhanced energy management strategies.

Safety is also a top priority for the GE SESO732. The device is designed to meet stringent international standards, equipped with protection features to prevent overload and ensure safe operation. Furthermore, the meter supports advanced surge protection to safeguard against electrical faults, prolonging the lifespan of both the meter itself and the connected equipment.

Another remarkable characteristic of the GE SESO732 is its user-friendly interface. The large display provides clear readings, and the intuitive navigation allows users to access different features effortlessly. Additionally, its compact design facilitates easy installation in various environments, whether mounted on a control panel or integrated within a larger electrical system.

Overall, the GE SESO732 is a sophisticated energy metering solution that combines high accuracy, advanced connectivity, comprehensive data logging, and robust safety features. Its design reflects GE's commitment to innovation in energy management technology, making it an ideal choice for businesses looking to enhance their energy efficiency and reduce operational costs. As industries worldwide increasingly focus on sustainability and performance, devices like the SESO732 will play a crucial role in achieving these goals.