ZTBSS1 Monogram Tubular Handle Kit, This KIT Includes

ZTBSS1 Monogram Tubular Handle Kit

BEFORE YOU BEGIN:

Read these instructions completely and carefully.

IMPORTANT – Save these instructions for local inspector’s use.

IMPORTANT – Observe all governing codes and ordinances.

Note to Installer – Be sure to leave these instructions with the Consumer.

Note to Consumer – Keep these instructions

with your Owner’s Manual for future reference. This kit provides a stainless steel tubular handle to coordinate with other Monogram appliances.

•The tubular handle must be installed onto the 3/4″ thick portion of the custom wood panel before the panel is secured to the door.

TOOLS AND MATERIALS REQUIRED

•Gloves to protect against sharp edges

•#2 Phillips screwdriver

•Drill and 1/4″ bit and 1/2″ spade bit

•Safety glasses

•Center punch

•Pencil

THIS KIT INCLUDES

•Tubular handle

•2 Mounting screws

•2 Handle standoffs

•2 Set screws for standoffs

•2 Nuts

•2 Washers

•Allen Wrench

INSTALL THE TUBULAR HANDLE

•Use the handle as a template to locate and mark the exact position of the screw holes. Be careful to avoid interference with custom panel mounting screws.

•Draw a pencil line, top to bottom and 7/8″ from the outside edge.

•Hold the tubular handle against the appearance side, centered on the marked line.

•Mark the screw hole locations at the center of the handle attachment posts.

•Center punch the marked hole locations. Drill 1/4″ pilot holes from the appearance side through the entire panel thickness.

•Use a 1/2″ spade bit to drill 1/4″ to 5/16″ deep into the back side of the panel. Insert washer (spacer) into the hole.

•Install screw through the handle standoff and into the pilot hole.

•Fasten nut onto the screw until the standoff is tight against the panel. The screw hole on the standoff should be pointing down toward the floor.

•Place handle attachment posts inside the standoffs.

•Use the Allen wrench to install the set screws. Tighten handle to standoffs.

7/8”





24-7/32”								30”

	Custom
	Framed
	Panel	Tubular
	Handle	Handle
	Handle
	Standoff
	Washer	Handle
	Nut	Attachment
	Nut	Post
		Post
		Set
	Screw	Screw
	Screw

r10279v specifications

The GE R10279V is a state-of-the-art digital multimeter that stands out in the field of electronic measurement and testing. Known for its accuracy and reliability, this device is widely used by professionals in various industries including electronics, telecommunications, and industrial maintenance.

One of the main features of the GE R10279V is its high precision measurement capability, enabling users to perform various electrical measurements with confidence. It can accurately measure AC and DC voltage, AC and DC current, resistance, frequency, and even temperature. This wide range of measurement options makes it an essential tool for troubleshooting and testing electrical systems.

Equipped with advanced technologies, the R10279V offers a smart auto-ranging function that automatically selects the best range for the measurements being taken. This feature eliminates the guesswork involved in selecting the appropriate measurement range and enhances user efficiency. Additionally, the multimeter features a robust display that provides clear, readable readings under various lighting conditions, making it easy to use in diverse working environments.

The GE R10279V is built to withstand the rigors of everyday use, showcasing a rugged and compact design. Its durable casing protects it against impacts and ensures longevity, making it suitable for fieldwork as well as laboratory settings. Moreover, the device includes safety features that comply with international standards, including CAT ratings that assure users of its ability to handle high voltage and current applications safely.

In terms of connectivity, the R10279V supports data logging capabilities, allowing users to record and store measurement data for later analysis. The device can also be interfaced with computers through USB or wireless connections, significantly streamlining data transfer and reporting processes.

Other noteworthy characteristics include its lightweight design for portability, long battery life to ensure extended operational periods, and a user-friendly interface with intuitive controls. Additionally, comprehensive manuals and customer support from GE facilitate ease of use, catering to both seasoned professionals and novices alike.

In summary, the GE R10279V digital multimeter integrates precision measurement, advanced technologies, and robust design, making it a versatile tool for electrical measurement and analysis in various applications. Its user-friendly features and reliable performance solidify its status as a preferred choice among professionals in the field.