Pelco FR8308 manual Speciﬁcations, Video

Page 20

Speciﬁcations

VIDEO
Number of Channels	8
Modulation Type	Pulse code modulation, 8-bit resolution
Video Input (FT8308)/	1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM
Video Output (FR8308)
Bandwidth	6.5 MHz
Gain	Unity
Crosstalk	-50 dB typical at 3.58 MHz
Differential Gain	<1%
Differential Phase	<1.2°
Tilt	<1%
Signal-to-Noise Ratio	>60 dB (CCIR weighted)
GENERAL
Operating Temperature	-40° to 167°F (-40° to 75°C)
Input Power Requirements	12 VDC or 24 VAC, 460 mA
LED Indicators	Video Present (per channel)
	Optic Fault
	Power
Dimensions	8.75” D x 2.28” W x 4.81” H
	(22.23 x 5.79 x 12.22 cm)
Unit Weight	2.64 lb (1.20 kg)
MECHANICAL
Connectors
Video	BNC (per channel)
Rack Power/Alarm	4-pin connector
Stand-Alone Power	2-pin connector, screw terminal
Fiber Optic	ST for multimode ﬁber
	ST or FC for single-mode ﬁber

20	C1647M-A (6/06)

Image 20

Contents FT8308/FR8308 Fiber Transmitter Receiver Page List of Tables ContentsList of Illustrations Important Safety Instructions Risk of Electric Shock Do not Open Regulatory Notices Radio and Television InterferenceProduct Overview DescriptionOptional Accessories ModelsMultimode Models Single-Mode ModelsFront Panel Front Panel FT8308 TransmitterFront Panel FR8308 Receiver Illustrates the front panel of the FR8308 receiverRear Panel Rear Panel FT8308 TransmitterRear Panel FR8308 Receiver Illustrates the rear panel of the FR8308 receiverMounting InstallationPackage Contents Mounting the Transmitter/Receiver Using the Wall Clip Mounting the TRANSMITTER/RECEIVER to a WallTransmitter Receiver Connections FT8308 Transmitter/FR8308 Receiver Connections Troubleshooting Meaning Possible Cause Corrective ActionOptic Fault LED Transmitter Speciﬁcations section Speciﬁcations VideoPower Model No Optical Maximum LaserTransmitter Multimode 62.5/125 µmC1647M-A 6/06 Product Warranty and Return Information ISO9001