GE PP945, PP975 manual Installation, Electrical Requirements

Page 6

Installation

Electrical Requirements

GROUNDING SPECIFICATIONS

Ground Path Resistance 0.10 Ω Max.

Insulation Resistance 250K Ω Min.

POWER SUPPLY REQUIREMENTS

The cooktop must be connected to a supply circuit of the proper voltage and frequency as specified on the nomenclature tag. Wire size must conform to the National Electrical Code or the prevailing local code. The nomenclature tag is located on the bottom of the burner box.

OVERCURRENT PROTECTION

Wall-Mounted Oven or Counter-Mounted Cooktops

WIRING

Built-in power leads are UL approved for connection to larger gauge household wiring. The insulation of these leads is rated at temperatures much higher than the temperature rating of household wiring. The current carrying capacity of a conductor is governed by the temperature rating of the insulation around the wire rather than the wire gauge alone.

WARNING: Improper connection of aluminum house wiring to these copper leads can result in a serious problem. Use only connectors designed for joining copper to aluminum and follow the manufacturer’s recommended procedure closely.

WIRING REQUIREMENTS

WARNING: This appliance must be properly grounded.

NEC RATING

MAXIMUM KILOWATT RATING

All cooktops must be hard wired (direct wired)

 

208V

236V

240V

 

into an approved junction box. The junction box

20 Amp

4.2

4.7

4.8

30 Amp

6.2

7.1

7.2

must be easily reached through the front of the

35 Amp

7.3

8.3

8.4

cabinet where the cooktop will be located. Allow

40 Amp

8.3

9.4

9.6

considerable slack in the conduit for serviceability.

50 Amp

10.4

11.8

12.0

A “plug and receptacle” is not permitted on these

 

 

 

 

 

 

 

 

products.

The branch circuit load for 1 wall-mounted oven or 1 counter-mounted cooktop is the rating on the nomenclature tag of the appliance.

The branch circuit load for a counter-mounted cooktop and not more than 2 wall-mounted ovens― all supplied from a single branch circuit and located in the same room―shall be computed by adding the nameplate ratings on the individual appliances and treating this total as equivalent to 1 range.

You must use a 2-wire, 3-conductor, 208/240 VAC, 60 Hertz electrical system. A white (neutral) wire is not needed for this unit. The cooktop must be installed in a circuit that does not exceed 125 VAC nominal to ground.

Refer to the nomenclature tag on your cooktop for the KW rating for your cooktop.

– 6 –

Image 6
Contents Technical Service Guide Important Safety Notice Table of Contents Model Number Nomenclature9 7 5 B M 1 B B Serial NumberIntroduction Model Number PP945Model Number PP975 Installation Electrical RequirementsDimensions and Clearances Overall Cooktop Dimensions 36-in. ModelsOverall Cooktop Dimensions 30-in. Models Control Features Features of your cooktopUsing the surface elements Single Surface Element Control Lock Operation Overview Digital Control SystemComponent Locator Views Front View Model PP945Top View Glass Top Removed Front View Model 975PP Cooktop Components Cooktop Removal From CountertopGlass Top Daughter Relay Module DRM To replace the DRMModel PP975 Model PP945 Relay Power Supply Module Rpsm To replace the RpsmHeating Elements To remove heating elementsTab Mark Number Diagnostics and Service Information Component Quick Reference TroubleshootingElement Resistance Troubleshooting Element Hot Light Troubleshooting Model PP Test LocationSchematics and Wiring Diagrams Model PP945 Element 240 VAC SchematicWiring Diagram Model PP945 Model PP975 Element 240 VAC Schematic Wiring Diagram Model PP975 Warranty For The Period Of GE Will Provide
Related manuals
Manual 40 pages 27.84 Kb

PP975, PP945 specifications

The GE PP945 and PP975 are two advanced gas ranges that showcase General Electric's commitment to innovation, performance, and user convenience. These models have become popular choices among home chefs looking for reliable appliances that optimize cooking experiences.

The GE PP945 features an induction cooktop with four cooking elements that provide precise temperature control and rapid heat adjustment. Induction technology is notable for its ability to heat cookware directly, leading to faster cooking and additional energy efficiency. With its sleek design, this model not only enhances kitchen aesthetics but also enables easy cleaning thanks to its flat surface. The oven in the PP945 provides true European convection, which utilizes a fan and additional heating element to circulate hot air evenly throughout the oven cavity. This results in improved baking performance and more consistent results across multiple racks.

On the other hand, the GE PP975 takes cooking convenience a step further with its range of smart features, including Wi-Fi connectivity that allows users to control their oven remotely via a smartphone app. This capability enables home cooks to preheat the oven or adjust cooking settings from virtually anywhere, adding unparalleled convenience to meal preparation. The PP975 also features a self-cleaning option, utilizing high-temperature cleaning to reduce food residue to ash, making maintenance simple and hassle-free.

Both models are equipped with a variety of cooking modes, including bake, broil, and various convection options, catering to diverse culinary techniques. The advanced oven design includes steam-cleaning options, which offer homeowners an environmentally friendly and efficient way to tackle spills and splatters without harsh chemicals.

Additional features include oven racks that are easily adjustable, precise temperature probes for meat, and large capacity ovens that can accommodate multiple dishes simultaneously. Safety features such as automatic shut-off and a child lock ensure that cooking remains safe for families.

In summary, the GE PP945 and PP975 are designed for those seeking a blend of modern technology and traditional cooking styles. With standout features such as induction cooking, smart technology, and efficient cleaning options, both ranges are well-equipped to enhance the cooking experience and meet the demands of today’s culinary enthusiasts. Whether you choose the PP945 for its induction efficiency or the PP975 for its smart capabilities, both models represent the forefront of cooking innovation.