Sonic Blue manual How to Operate the MVP841, con’t, How to Set Markers, DVD Repeat Mode

Page 27

How to Operate the MVP841, con’t

Figure 30

The available disc tracks will appear on the left side of the screen.

2.Use the ARROW push-buttons to move to the specific track that you wish to play and press the SELECT push-button. The selected track number will appear in the right hand column. Up to 18 tracks can be stored in memory for selective play.

3.Use the Down ARROW push-button to access, Clear Last, or Clear All Selections and press SELECT to ac- tivate.

4.Press the PLAY MODE push-button twice to select the option of Random Play of all tracks on the disc.

5.Cancel the Play Mode by pressing the PLAY MODE push-button three times.

How to Set Markers

This feature allows you establish up to four different times on a disc where you wish play to start, other than at the be- ginning of the disc. Refer to figure 28.

1.Press the DISPLAY push-button twice and an ARROW push-button to access the MARKER On Screen Icon.

2.While a disc is playing, press the MARKER push-but- ton at the time on the disc where you wish play to start, other than at the beginning of the disc. The MARKER Icon will appear on the screen.

3.Press the SELECT push-button to place marker No. 1 in memory.

4.Press the Right ARROW push-button to advance to MARKER Number 2 on the Icon display. At the time on the disc where you wish to create a second starting point, press the SELECT push-button again to select a second play point. Up to five markers can be stored in

memory. The On Screen Marker Icon Display will in- dicate the total number of Markers that have been stored in memory.

5.To start play at a Marker Icon Number, first press PLAY and then MARKER. With the left or right AR- ROW push-button move to the Marker Icon number where you wish play to start. Press the UP ARROW push-button and the disc will immediately start to play

at that marker point.

Note: If you wish to erase a MARKER, move to the desired Marker Icon Number with an ARROW key and press the CLEAR push-button.

DVD Repeat Mode

This allows you to repeat a DVD Chapter or the entire disc on a continuous basis.

1.Press the REPEAT MODE push-button once during disc play to repeat a DVD chapter. The On Screen Icon will appear with C indicated.

2.Press REPEAT MODE a second time to repeat an en- tire disc. The Icon will indicate T.

3.Press REPEAT MODE a third time to cancel the Re- peat mode. The Icon will indicate Off.

CD Repeat Mode

1.Press the REPEAT MODE push-button once during disc play to access the Repeat Icon. The On Screen Icon will appear with Off indicated. Refer to figure 28.

2.Press REPEAT MODE a second time to repeat a single track. The Icon will indicate T.

3.Press REPEAT MODE a third time to repeat the entire disc. The Icon will indicate A (All Tracks).

4.Press REPEAT MODE a fourth time to cancel the Re- peat mode. The Icon will indicate Off.

DVD and CD Disc A-B Repeat

1.While a disc is playing, press the Remote Control A-B REPEAT push-button to store in memory the time on a disc where you wish to start a segment for repeat play. The A-B Repeat On Screen Icon will appear with A displayed. Refer to figure 28.

2.Press A-B REPEAT a second time when you reach the time on the disc where the repeatable segment is to end. The On Screen Icon will now display A and B. The selected disc segment will start to play repeatedly.

3.Cancel the A-B REPEAT mode by pressing the A-B REPEAT push-button a third time.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Owner’s Manual MVP841 DVD / Video CD / CD PlayerPlease Take a Moment Customer ServiceTable of Contents Thank YouGeneral Safety InstructionsCare of Equipment Safety Instructions con’tInstallation ConnectionPerformance Features Introduction and Performance FeaturesDimensions MVP841 Dimensions Installation MVP841 Rear Panel Connections Video Output Power ControlHow to Connect Control, Analog and Digital Audio Optional Connecting InformationPUT of a McIntosh MX132 A/V Control Center Video Input How to Connect Video and AC PowerSTANDBY/ON Remote Control Push-Buttons How to Operate the Remote Control Select push-button. Refer to figures 2 How to Operate the Setup ModeHow to Set Disc Language Default SettingsPress 5 to select another language for Subtitles On Screen Menu LanguageUnlock the Player SETUP, con’t How to Set RatingsPress Select again and the initial setup menu will reappear Word will appear. Refer to figureHow to Set On-Screen Messages How to Set Menu LanguageChange Color and Position SETUP, con’tHow to Set FL Display Press 1 to select On Press 2 to select OffHow to Set TV Aspect Ratio Settings for A/V Electronics with a dts Decoder SETUP, con’t How to Set Digital Audio OutputSettings when only Analog Outputs are being used Settings for A/V Electronics with Dolby Digital DecoderAudio During Search How to Set the Other SettingsStill Mode TV ModeBlack Level Control Still Picture ModePan&Scan and Letterbox Range CompressionReset of Microprocessors How to Operate the MVP841Power On How to Load and play a DVD/CD DiscCD Disc Pause Resume Play ModeAt the time you left off DVD Disc Pause/Still FrameDirect CD Track Selection Access a Specific Time location on a DVDOn Screen Icon Display Direct DVD Disc Chapter SelectionCD Repeat Mode How to Operate the MVP841, con’tHow to Set Markers DVD Repeat ModeTo Add, Remove or Change Subtitle Language How to Select a Video Angle PreferenceTo View or Change DVD Disc Language DVD Title SelectionMVP841 Notes Audio Specifications Specifications Video Specifications General SpecificationsPacking Instructions

MVP841 specifications

The Sonic Blue MVP841 is a robust and versatile wireless voice-over-IP (VoIP) device that revolutionizes traditional communication methods. Designed to meet the demands of modern businesses and home users alike, this device integrates cutting-edge technologies to provide seamless connectivity and high-quality voice transmission.

One of the standout features of the MVP841 is its dual-band capability. It operates on both the 2.4 GHz and 5 GHz frequency bands, which significantly reduces interference and enhances network performance. This dual-band support is particularly advantageous in environments with multiple devices, ensuring that voice calls remain clear and uninterrupted even during peak internet usage.

The device comes equipped with advanced Quality of Service (QoS) features. This technology prioritizes voice traffic over other types of data, ensuring that calls are transmitted with minimal latency and jitter. The MVP841 is designed to handle multiple simultaneous calls without compromising on audio quality, making it an ideal choice for businesses that rely on consistent communication.

The MVP841 also supports a range of VoIP protocols, including SIP (Session Initiation Protocol), which provides flexibility in integration with various VoIP service providers. This compatibility allows users to take advantage of cost-effective calling options while maintaining high quality.

In terms of security, the Sonic Blue MVP841 offers robust encryption options to protect voice communications from unauthorized access. With features such as Secure Real-time Transport Protocol (SRTP) and Transport Layer Security (TLS), users can rest assured that their conversations are well-protected.

A user-friendly interface is another hallmark of the MVP841. It features a web-based management portal that allows for easy configuration and monitoring of the device. This simplifies the setup process and provides users with quick access to key settings and performance metrics.

Lastly, the MVP841’s compact design and energy-efficient technology make it a practical addition to any workspace or home environment. With its combination of high-performance capabilities, versatile compatibility, and enhanced security features, the Sonic Blue MVP841 is an excellent choice for those looking for a reliable and efficient VoIP solution for their communication needs.
Top Page Image Contents