GE JP330P Read all instructions before using this appliance, Before performing any service

Page 3

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

When using electrical appliances, basic safetv mecautions should be followed~including the following:

●Use this appliance only for its intended use as described in this manual.

●Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the provided installation instructions.

●Don’t attempt to repair or replace any part of your cooktop unless it is specflcally recommended in this book. All other servicing should be referred to a qualified technician.

c Before performing any service,

DISCONNECT THE COOKTOP POWER SUPPLY AT THE HOUSEHOLD DISTRIBUTION

PANEL BY REMOVING THE

FUSE OR SWITCHING OFF THE CIRCUIT BREAKER.

●Do not leave children alone- children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance,

●Don’t allow anyone to climb, stand or hang on the cooktop.

●CAUTION: ITEMS OF INTEREST TO CHILDREN SHOULD NOT BE STORED IN CABINETS ABOVE A COOKTOP—CHILDREN CLIMBING ON THE COOKTOP TO REACH ITEMS COULD BE SERIOUSLY INJURED.

●Never wear loose-fitting or

–hanging garments while using the appliance. Flammable material could be ignited if brought in contact with hot solid

disk elements and may cause severe bums.

●Use only dry pot holders— moist or damp potholders on hot surfaces may result in bums from steam. Do not let pot holders touch hot solid disk elements. Do not use a towel or other bulky cloth in place of a pot holder.

●For your safety+ never use your appliance for warming or heating the room.

●Storage in or on appliance- Flammable materials should not bo stored on or near the solid disk elements.

*Keep hood and grease filters clean to maintain good venting and to avoid grease fires.

*Do not let cooking grease or other flammable materials accumulate on the cddop.

●Do not use water on grease fires. Never pick up a flaming pan. Smother flaming pan on surface unit by covering pan completely with well-fitting lid, cookie sheet or flat tray.

Flaming grease outside a pan can be put out by covering with baking soda or, if available, a multi-purpose dry chemical or foam type fire extinguisher.

●Do not touth solid disk elements. These surfaces may be hot enough to bum even though they are dwk in color. During and after use, do not touch, or let clothing or other flammable materials contact solid disk elements or areas nearby solid disk elements; allow sufficient time for cooling, first.

Potentially hot surfaces include the cooktop and areas facing the Cooktop.

~When cooking po~ follow the directions exactly and always cook the meat to an irikrnal temperature of at least i70°F. This assures thaL in the remote possibility that trichina may be present in the meat, it will be killed and the meat will be safe to eat.

●Use proper pan sim2--This appliance is equipped with one or more solid disk elements of different size. Select cookware having flat bottoms large enough to cover the solid disk element. The use of undersimd cookware will expose a portion of the solid disk element to direct contact and may result in ignition of clothing. Proper relationship of cookware to burner will also improve efficiency.

●Never leave solid disk elements unattended at high heat settings. 130ilover causes smoking and greasy spillovers that may catch on fire.

●Don’t assume that you know how to operate till parts of the cooktop. Some features may work differently from those on your previous cooktop,

●Clean cooktop with caution,

If a wet sponge or cloth is used to wipe spills an a hot cooking area, be carefld to avoid steam burn.

Same cleansers can produce noxious fumes if applied to a hot surface.

*Only certain types of glass, glasshxmmic, earthenware or other glazed containers are suitable for cooktop service; others may break because of the sudden ch-mge in temperature. (See “Cookware Tips”’ on page 7 for suggestions.)

3

,–

—– ——-.——

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Solid Disk Cooktop Help us help you Never wear loose-fitting or Read all instructions before using this applianceBefore performing any service Clean cooktop with caution‘ Wt&ch foods being fried at HI or Medium HI heat settings INSTRUCTIONS Energy-Saving TipsSpread the flame General Information About Solid Disk Elements Cooktop FeaturesBefore Using Your Solid Disk Elements for First Time Solid Disk ElementsInfinite Heat Controls How to Set the ControlsGuide for Using Heats ControlsSolid Disk Element Cookware Tips To check how a pan will perform on a solid disk elementPans with uneven bottoms are not suitable Cocoa Cooking GuideDirections Chocolate Suggested Heat SettingsHome Canning Tips Observe Following Points in CanningCanning should be done on cooktop only Questions and Answers Care and Cleaning Solid Disk ElementsGlass Top Questions? ~- Use This Problem SolverPage Wdll Be There Warranty

JP330P specifications

The GE JP330P is a powerful and innovative gas turbine designed for optimized performance in a range of energy generation applications. Known for its high efficiency and reliability, the JP330P leads the way in modern energy solutions, particularly in the realm of combined cycle power plants.

One of the key features of the GE JP330P is its advanced combustion system. This turbine utilizes a dry low NOx (DLN) combustion technology that helps to minimize emissions, making it one of the cleanest gas turbines in its class. The DLN system ensures that nitrogen oxide emissions remain well below regulatory limits, allowing operators to meet stringent environmental standards while delivering efficient power generation.

The JP330P is built with a robust and durable design, featuring high-temperature materials that withstand the extreme conditions found in a gas turbine environment. This ensures not only the longevity of the turbine but also its consistent performance over time. Capacities for the JP330P typically range around 330 megawatts, making it suitable for both peaking and baseload power applications.

In terms of operational flexibility, the JP330P boasts rapid start-up capabilities, reducing the time needed to generate electricity from a cold start. This characteristic is particularly beneficial in balancing power supply in response to fluctuating demand, allowing utilities to efficiently manage their energy outputs.

GE’s Digital Wind Farm technology enhances the operational efficiency of the JP330P by integrating data analytics and advanced monitoring systems. This feature allows plant operators to optimize performance in real-time, reduce downtime, and improve overall reliability through predictive maintenance practices.

The turbine’s modular design also aids in maintenance and operations. With components that can be accessed and replaced with minimal downtime, the JP330P is designed to maximize availability and minimize disruptions.

In summary, the GE JP330P gas turbine is a leading option for energy producers looking for high efficiency, environmental sustainability, and operational flexibility. With its state-of-the-art technologies, durable construction, and advanced combustion system, the JP330P stands out as a robust solution for modern energy challenges, ushering in a new era of reliable power generation.
Top Page Image Contents