GE JP330P warranty Cooktop Features, General Information About Solid Disk Elements

Page 5

Cooktop Features

1. Indicator lights for solid disk elements.

2. Controls for solid disk

elements. (some models have Sensi.TempTM control(s) see

next page)

3. Solid disk elements.

4. Sensi-TempTMsolid disk element. (on models so equipped.)

5. Tempered glass top.

Solid Disk Elements

Before Using Your

Solid Disk Elements for

the First Time

The top working surfaces of the new solid disk elements have a protective coating that must be hardened before using the elements for the first time. To harden this coating, the solid disk elements should be heated at HI heat setting for 3 to 5 minutes, without cookware on the element.

There will be some smoke and odor; this is normal.

THE SOLID DISK ELEMENT PROTECTIVE COATING MUST BE HARDENED TO HELP PROTECT THE ELEMENT OVER ITS LIFE.

—

—

General Information About Solid Disk Elements

Using a solid disk element cooktop is quite similar to using an electric coil, with which you probably are familiar. With both types of surface units you will enjoy the cleanliness of electricity and the benefits of retained heat in the elements. However, there are differences.

●Solid disk elements do NOT glow red, even at high heat settings.

●Solid disk elements reach temperature a little slower, and hold heat longer, than conventional elements. Solid disk elements have very even heat distribution. Since solid disk elements hold heat longer, you may wish to turn the element off sooner, and take advantage of the residual heat. The amount of residual heat depends on the quantity and type of food, the material and thickness of the pan and the setting used for cooking.

●The red dots in the center of the solid disk elements are built-in temperature limiters that automatically reduce the heat if a pan boils dry, if the element is turned on without a pan or if the pan is not making enough contact with the surface of the element. The red dots will wear off with use without affecting the performance of the elements.

●There is retained heat in the element. On boilovers, wait for element to cool before cleaning element area.

●Solid disk element cooking takes you a step closer to easier cleanup, because the cooking surface is sealed against spills and there are no drip pans or burner box to clean.

●You must use proper flat- bottomed cookware, not cookware that is warped, convex, or concave. Improper cookware will cause unsatisfactory cooking results.

5

——.—.—

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Solid Disk Cooktop Help us help you Before performing any service Read all instructions before using this applianceClean cooktop with caution Never wear loose-fitting orSpread the flame ‘ Wt&ch foods being fried at HI or Medium HI heat settingsINSTRUCTIONS Energy-Saving Tips Before Using Your Solid Disk Elements for First Time Cooktop FeaturesSolid Disk Elements General Information About Solid Disk ElementsGuide for Using Heats How to Set the ControlsControls Infinite Heat ControlsPans with uneven bottoms are not suitable Solid Disk Element Cookware TipsTo check how a pan will perform on a solid disk element Cocoa Cooking GuideDirections Chocolate Suggested Heat SettingsCanning should be done on cooktop only Home Canning TipsObserve Following Points in Canning Questions and Answers Glass Top Care and CleaningSolid Disk Elements Questions? ~- Use This Problem SolverPage Wdll Be There Warranty

JP330P specifications

The GE JP330P is a powerful and innovative gas turbine designed for optimized performance in a range of energy generation applications. Known for its high efficiency and reliability, the JP330P leads the way in modern energy solutions, particularly in the realm of combined cycle power plants.

One of the key features of the GE JP330P is its advanced combustion system. This turbine utilizes a dry low NOx (DLN) combustion technology that helps to minimize emissions, making it one of the cleanest gas turbines in its class. The DLN system ensures that nitrogen oxide emissions remain well below regulatory limits, allowing operators to meet stringent environmental standards while delivering efficient power generation.

The JP330P is built with a robust and durable design, featuring high-temperature materials that withstand the extreme conditions found in a gas turbine environment. This ensures not only the longevity of the turbine but also its consistent performance over time. Capacities for the JP330P typically range around 330 megawatts, making it suitable for both peaking and baseload power applications.

In terms of operational flexibility, the JP330P boasts rapid start-up capabilities, reducing the time needed to generate electricity from a cold start. This characteristic is particularly beneficial in balancing power supply in response to fluctuating demand, allowing utilities to efficiently manage their energy outputs.

GE’s Digital Wind Farm technology enhances the operational efficiency of the JP330P by integrating data analytics and advanced monitoring systems. This feature allows plant operators to optimize performance in real-time, reduce downtime, and improve overall reliability through predictive maintenance practices.

The turbine’s modular design also aids in maintenance and operations. With components that can be accessed and replaced with minimal downtime, the JP330P is designed to maximize availability and minimize disruptions.

In summary, the GE JP330P gas turbine is a leading option for energy producers looking for high efficiency, environmental sustainability, and operational flexibility. With its state-of-the-art technologies, durable construction, and advanced combustion system, the JP330P stands out as a robust solution for modern energy challenges, ushering in a new era of reliable power generation.
Top Page Image Contents