GE JGP985 Surface burner and grill modules, Consumer Support Troubleshooting Tips, Grill Module

Page 10

Instructions

Surface burner and grill modules.

Throughout this manual, features and appearance may vary from your model.

Care and Cleaning Operating Instructions Safety

Sealed Burner Module

To Install the Sealed Burner Module:

1.Make sure that all control knobs are set to OFF.

2.Clean the cooktop basin to remove any grease accumulation. See the Care and Cleaning the Cooktop section.

3.With the back of the burner module tilted up and the two round openings and two pins facing toward the front, insert the module in the cooktop basin.

To Remove the Sealed Burner Module:

1.Make sure that all control knobs are set to OFF and that the cooktop is cool.

2.Lift up the edge of the burner module until the bottom of the module clears the edge of the basin.

IMPORTANT: Do not lift the module too high while it is still connected—you could damage the ignitor rods and mixer tubes.

4.Slide the burner module forward until the pins start to engage the white slotted receptacle.

5.Lower the back of the module into place and carefully slide it forward until the pins are fully engaged.

6.Place the burner caps on the burners. Carefully place the grate onto the module with the two tabs on the underside toward the center of

the cooktop.

3.Hold the module by the sides and pull it away from the slotted receptacle and brass orifices. Lift it out of the basin when it is completely unplugged.

4.Do not store or stack modules where they could fall or be damaged.

NOTE: The optional sealed burner module JXGB85 can replace the grill burner assembly.

Grill Module

The grill consists of a black grill grate and the grill burner. Only install the grill on the left side of your cooktop.

Consumer Support Troubleshooting Tips

To Install the Grill Module:

1. Make sure that all control knobs are set to OFF.

2. Position the grill burner with the two round tubes and two pins facing the front.

3. Slide the grill burner forward until the pins and ignitors are engaged in the white slotted receptacle; then lower the burner until it rests on the mounting pins.

To Remove the Grill Module:

1.

Make sure that all control knobs are

 

set to OFF and all grill components

 

are cool.

2.

Remove the grill grate.

3.

Lift the grill burner up slightly and

 

pull it away from the white slotted

10

receptacle and brass orifices. Lift it out

of the basin when it is completely

unplugged.

4.Carefully place the grill grate on the cooktop. The grate is designed to fit one way only. See the illustration.

NOTE: Before using the grill for the first time, heat the grill burner to remove the protective shipping coating. Heat the grill burner on HI for 10 minutes and use the vent system to remove any additional smoke during cooling.

4.Do not store or stack modules where they could fall or be damaged.

NOTE: The optional sealed burner module JXGB85 can replace the grill burner assembly.

Image 10
Contents 4226-0016-00 164D4290P414 49-8026412-04 JR Write the model and serial numbers here Model # Serial #What to do if YOU Smell GAS Important Safety Notice Safety Instructions Operating InstructionsCook Meat and Poultry THOROUGHLY… Surface Burners Features of your cooktop Feature IndexSealed Burner Module Cooktop accessoriesGrill Model JXGG85 Griddle Model JXGL85Electric Ignition Using the gas surface burnersHow to Select Flame Size Before Lighting a Gas BurnerHow to Operate the Downdraft Vent System Using your cooktopUsing the downdraft vent system Wok This WaySurface burner and grill modules Consumer Support Troubleshooting TipsGrill Module Grilling Using the GrillShould a Sustained Flare-Up Occur Grilling Tips Poultry Grilling guideMeat FishGriddle Griddle AccessoryUsing the griddle Griddle GuideSafety Instructions Care and cleaning of the cooktopCleaning Troubleshooting Grill Grate Grill BurnerVent Grille and Filter Igniters Porcelain Burner BasinInstallation Instructions Read these instructions completely and carefullyUnpack Your Cooktop Parts IncludedPreparation Preparing for InstallationFor flexible connection where local codes permit Tools and Parts NeededInstalling Cabinets Over Your Cooktop Minimum Spacing RequirementGAS and Electrical Location Pressure TestingPreparing the Countertop Provide Adequate GAS SupplyBlower to Ductwork Alignment Prepare for DuctworkTypical duct arrangement countertop series Plan the Duct RUN Install the DuctworkGeneral Considerations Should not exceed 100 feet equivalent length Ductwork CalculationsDo not use flexible plastic ducting Install the Cooktop Prepare the CooktopTest for Leaks Install the Pressure Regulator and ConnectPerform leak test per the following instructions Optional Attach a Blower Transition Duct Install the CooktopSecure the Cooktop Connect the DuctworkAssemble the Cooktop Final AssemblyInstall Grease JAR, Downdraft Filter and Vent Grille Check Operation of DowndraftLP Conversion Instructions Gas Cooktop Tools YOU will NeedGAS Supply Convert Surface Burners Adjust Grill Burner AIR ShutterCheck Ignition Testing Flame Stability Flame RecheckBefore you call for service… Instructions Operating Care and Cleaning We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Replace GE Gas Cooktop WarrantyInstructions Care What GE Will Not CoverConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design StudioDescendente a gas ¡ADVERTENCIA Aviso Importante DE Seguridad Precaucion No deberánConsumidor Solucionar problemas Cuidado y Instrucciones Importantes DE SeguridadCuidado y limpieza Solucionar problemas Apoyo al consumidor AdvertenciaCaracterísticas de su estufa de cubierta Indice de las característicasAsador Modelo JXGG85 CuidadoPlancha Modelo JXGL85 Cómo encender un quemador Cómo usar los quemadores de la superficieIgnición eléctrica Después de encender un quemadorCocinar en ollas tipo wok Como usar su estufa de cubiertaEl sistema de ventilación Cacerolas para cocinarMódulos de quemadores y de asador Módulo de quemadores selladosPara asar Cómo utilizar el asadorConsejos para asar Aves Guía para asarCarne PescadoLa plancha para asar Plancha para asarGuía de la plancha para asar Cuidado y limpieza Parrilla del asador OperaciónQuemador del asador Rejilla y filtro de ventilaciónMódulo de quemador sellado Cuidado y limpieza Solucionar problemasIgnitores Contenedor de porcelana de los quemadoresInstrucciones de instalación Lea estas instrucciones completa y cuidadosamenteDesempaque LA Estufa Partes IncluidasImportante PreparaciónHerramientas Y Partes Necesarias Para conexiones rígidasEspacio Mínimo Requerido Proporcione EL Suministro Adecuado DE GAS Preparación DE LA EncimeraUbicación DEL Suministro Eléctrico Y DE GAS Cómo Probar LA PresiónAlineación DE LOS Conductos DEL Soplador Preparacion Para EL DuctoNota Instalación DEL Conducto Consideraciones GeneralesImportante Cálculos DE LOS DuctosNo USE conductos plásticos flexibles Instalación DE LA Estufa Prepare LA EstufaInstalación Y Conexión DEL Pruebe Para FugasDEL Soplador Instale LA EstufaAsegure LA Estufa Conecte LOS ConductosDE Ventilación Descendente LA Rejilla DE Ventilación Ensamblaje FinalEnsamble LA Estufa Inspeccione LA Operación DE Ventilación DescendenteInstrucciones de conversión a LP Herramientas QUE NecesitaráSuministro DE GAS Convierta EL Regulador DE PresiónConvierta LOS Quemadores DE Superficie Ajuste EL Obturador DE Aire Para EL Quemador DEL AsadorAjuste LA Llama Baja Para Hervir a Fuego Lento Inspeccione LA IgniciónLlama Para Inspeccionar SI Existen Fugas Cómo probar la estabilidad de la llama Cómo Convertir Otra VEZ a GAS NaturalReinspección de la llama Antes de llamar para solicitar servicio… Haber apagado el El sonido de chispaPersiste después de Quemador Sonido ocasional deFunciona GEAppliances.comEl ventilador no AutomáticamenteNotas GE reemplazará Garantía de GE para su estufa de cubierta a gasLo que no está cubierto por GE Garantías ampliadas Apoyo al Consumidor Página Web de GE AppliancesSolicite una reparación Piezas y accesorios

JGP985 specifications

The GE JGP985 is a contemporary gas range designed for the modern kitchen, blending advanced technology with culinary excellence. This model stands out with its professional-grade features, making it an excellent choice for both amateur cooks and seasoned chefs alike.

One of the key highlights of the GE JGP985 is its powerful burners. The range typically includes five burners with various output levels, including a high-output burner that delivers 20,000 BTUs, ideal for searing and stir-frying. The burners are equipped with precise simmer settings, allowing for delicate tasks like melting chocolate or simmering sauces without worry.

The range features a shiny stainless steel finish that not only enhances its aesthetic appeal but also ensures durability and easy cleaning. Additionally, the continuous grates provide a seamless cooking surface that accommodates pots and pans of various sizes, making it easy to transition from one burner to another without lifting heavy cookware.

Another notable technology incorporated into the GE JGP985 is its convection oven, which utilizes a fan to circulate hot air for more even cooking and faster preheating. The oven typically includes multiple cooking modes, such as baking, broiling, and roasting, allowing for versatility in meal preparation. The oven's capacity is generous, accommodating multiple dishes at once, which is perfect for family dinners and gatherings.

The range also boasts a self-cleaning feature, making maintenance hassle-free. With just the push of a button, the self-cleaning option activates a high-temperature cycle that burns away food residues, simplifying post-cooking cleanup.

Additional features may include a built-in Wi-Fi connectivity option, enabling remote control and monitoring via smartphone apps. This technology allows users to receive notifications, preheat the oven remotely, and explore recipes, enhancing the cooking experience.

Safety is paramount in kitchen appliances, and the GE JGP985 does not compromise in this area. It is equipped with features like automatic shut-off and a safety valve that prevents gas leaks, ensuring peace of mind while cooking.

In summary, the GE JGP985 gas range combines powerful performance, innovative technologies, and user-friendly design, making it an optimal choice for chefs looking to elevate their culinary adventures. With its blend of efficiency and convenience, this model represents a significant investment for any home kitchen.