GE GSD6660, GSD6860 About the dishwasher control panel, Status Indicator Lights, Or Sani Wash

Page 4

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

About the dishwasher control panel.

You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance may vary from your model.

15

2

4

3

Control Settings

1 Status Indicator Lights

The Status display tells you what’s happening while the dishwasher is in operation and may flash, indicating a malfunction (see page 6). The lights will come ON indicating the sequence of operation the dishwasher is in.

SENSING Displayed while the ExtraCleanSensor is measuring the amount of soil and temperature of water. (on some models) The dishwasher will adjust the selected cycle to achieve optimal performance.

WASHING Displayed during prewash and main wash periods. (on some models)

RINSING Displayed during rinse periods. (on some models)

DRYING Displayed during HEATED DRY. (on some models)

SANITIZED Displayed when cycle has met sanitization conditions. Light remains ON until door is opened.

CLEAN Displayed when a wash cycle is complete. The light will remain ON until door is opened.

2

ExtraCleanSensor Selections

 

 

The light above the selected pad will be ON to indicate which ExtraClean

 

Sensor Selection has been

 

 

 

selected.

 

 

 

 

ANTI-BACTERIA

Heavy 9.1 gal., 91 min.

 

 

 

or SANI WASH

Medium 7.8 gal., 89 min.

 

 

 

 

Light 6.5 gal., 87 min.

 

 

This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle length will vary depending on the temperature of your inlet water.

NOTE: The Anti-Bacteria cycle is monitored for sanitization requirements. If the cycle is interrupted during or after the main wash portion or if the incoming water temperature is so low that adequate water heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the sanitized light will not illuminate at the end of the cycle.

NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.

POTS

Heavy 10.4 gal., 102 min.

& PANS

Medium 9.1 gal., 76 min.

 

Light 7.8 gal., 72 min.

This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils.

This cycle may not remove burned-on foods. Everyday dishes are safe to be used in this cycle.

NORMAL WASH Heavy 9.1 gal., 77 min.

Medium 6.5 gal., 62 min.

Light 5.2 gal., 49 min.

4

This cycle is for medium/heavily soiled dishes and glassware.

 

Image 4
Contents Safety Instructions Operating Instructions Write the model and serial numbers here Model # Serial #Water Heater Safety Consumer SupportProper Disposal of the Dishwasher Before You Throw Away Your Old DishwasherStatus Indicator Lights ExtraClean Sensor SelectionsAbout the dishwasher control panel Or Sani WashExtras Rinse only cycleUsing the dishwasher Flashing display lightsDish Preparation Prior to Loading Lower Rack Upper RackSilverware Basket Loading place settings… About optional accessoriesUpper Rack-10 place settings Upper Rack-12 place settingsLower Rack-12 place settingsCleaning the Door Panel Cleaning the Control PanelCaring for the dishwasher Protect Against FreezingBefore you call for service… Problem Possible Causes What To DoSpots and filming On glassesFlatware Cloudiness onWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Dishwasher Warranty For The Period GE Will ReplaceWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYSchedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio
Related manuals
Manual 44 pages 44.69 Kb