Caring for the dishwasher. | GEAppliances.com | |
|
|
|
To clean the control panel, use a lightly dampened cloth, then dry thoroughly. To clean the exterior, use a good appliance polish.
Never use sharp object, scouring pads or harsh cleaners on any part of the dishwasher.
Protect Against Freezing
| If your dishwasher is left in an unheated place | 3 | Drain water from the inlet line and water | |
| during the winter, ask a service technician to: | valve. (Use a pan to catch the water.) | ||
| Cut off electrical power to the dishwasher. | 4 | Reconnect the water inlet line to the | |
| 1 Remove fuses or trip circuit breaker. | water valve. | ||
Sump cover screws | Turn off the water supply and disconnect |
| Remove the plastic sump cover in the tub | |
2 the water inlet line from the water valve. | 5 bottom and use a sponge to soak up water | |||
| ||||
in the rubber boot.
Safety Instructions
Operating
Two types of air gaps
Check the air gap any time your dishwasher isn’t draining well.
Does Your Dishwasher Have an Air Gap?
An air gap protects your dishwasher against water backing up into it if a drain clogs. The air gap is not a part of the dishwasher. It is not covered by your warranty. Not all plumbing codes require air gaps, so you may not have one.
The air gap is easy to clean.
1 Turn off the dishwasher and lift off the chrome cover.
2 Unscrew the plastic cap and clean with a toothpick.
Instructions
The Stainless Steel Panels
The stainless steel panels can be cleaned with Cerama Bryte® or a similar product using a clean, soft cloth.
You can order Cerama Bryte® Stainless Steel
Appliance Cleaner through GE Parts by calling
800.626.2002.
11
Troubleshooting Tips
Consumer Support