GE GSD500 manual @ Cycle selection hints, What happens in each cycle

@ Cycle selection hints .

It is important to follow the loading instructions on pages 8 and 9.

NORMAL WASH is for loads of everyday dishes, glasses and cookware.

LIGHT WASH is for dishes that are lightly soiled with soils that have not dried on. Also for everyday dishes that have extra preparation before loading.

RINSE & HOLD is for rinsing partial loads which will be washed later. Do not use detergent.

What happens in each cycle

●You’11hear occasional clicking sounds:

—Soft food disposer shredding action.

—Drain valve opening to pump water out,

m—Timer control as cycle

~J2J” progresses.

—Detergent cup opening.

●During the drying period: —The motor stops.

—Water vapor comes through the vent by the door latch during drying and when water is being pumped out.

	Water Use	Wash
		Cycle Time
Wash Cycles	Gallons	Minutes	Cycle Sequence
	(approx.)	(approx.)
NORMAL WASH	12.1	‘7	EIIEIEEIEIEIB
LIGHT WASH	10.3
RINSE & HOLD	4.9	14	Rinse Rinse Rinse

Drying Options:

HEATED DRYING. Available on all wash cycles except RINSE& HOLD. Add 29 minutesto

wash cycle time.

ENERGY SAVER. Drying heater is turned off. Dishes dry naturally.

.5