Prepare Electrical Wiring, Remove Wood Base

Installation

Preparation

Installation

Instructions

PREPARE ELECTRICAL WIRING

FORPERSONALSAFETY:Do not use an extension cord or adaptor plug with this appliance.

Electrical Requirements

oThis appliance must be supplied with 120V, 60 Hz, and connected to an individual properlg grounded branch circuit, protected bg a 15 or 20 ampere circuit breaker or time delag fuse.

, If the electrical supplg does not meet the above requirements, call a licensed electrician before proceeding.

[] Your dishwasher circuit should not be used for ang other appliance while the dishwasher is in operation as the dishwasher requires a full capacitg of the circuit.

STEP 1 REMOVE WOOD BASE

IMPORTANT- Do not kick off wood base! Damage will occur.

,Move the dishwasher close to the installation locution and lag it on its back.

Remove the four skid bolts on the underside of the wood base with 3/8" nut driver

Discard base and bolts. Upright the dishwasher

STEP 2 INSTALL FAUCET ADAPTER

[] If the wall receptacle gou plug the dishwasher'spower cord into is

controlled bg a switch, turn on the

Insure proper ground

The special faucet adapter supplied with gour dishwasher must be attached to the sink faucet before gou can use gour

exists before use

switch.

Do not, under ang circumstances, cut or remove the third grounding prong from the power cord.

Grounding Instructions-Power Cord Models

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock bg providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

The improper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if gou are in doubt that the appliance is properlg grounded. Do not modifg the plug provided with the appliance, if it will not fit the outlet, have a proper outlet installed bg a qualified technician.

dishwasher.

The faucet adapter is designed to fit standard spouts having internal or external threads. You will find the adapter and two washers in the faucet adapter packet in your dishwasher.

To install faucet adapter, first remove the old aerator or trim ring on gour faucet spout.

External Threads

,If faucet has external threads: Insert the thinner of the two washers into the faucet adapter and attach it to the faucet spout. Tighten with pliers.

Internal Threads

,If faucet has internal threads: Insert both of the washers into the faucet adapter and attach it to the faucet spout.

Tighten with pliers.

Non-Standard Threads

o If the faucet adapter threads do not match gour faucet spout, gour local hardware or plumbing supplg store normallg has additional fittings to adapt gour faucet spout to the special faucet adapter.

CAUTION: A sink sprag attachment hose can burst if it is installed on the same faucet as gour dishwasher. We suggest that gou disconnect the sink sprag attachment, if gour sink has one, and place a cap over the opening.

GLC4000 specifications

The GE GLC4000 is a sophisticated gas turbine designed to deliver high efficiency and reliability for power generation applications. Created by General Electric, this turbine stands out in the competitive energy landscape due to its advanced technologies and robust performance characteristics.

One of the primary features of the GLC4000 is its high thermal efficiency, which allows it to convert a significant proportion of the fuel's energy into electricity. This efficiency not only contributes to lower operational costs but also helps reduce greenhouse gas emissions, making it an environmentally friendly choice for power producers. The GLC4000 typically operates with an efficiency rating of around 61%, positioning it among the most efficient turbines available today.

Incorporating cutting-edge technologies, the GLC4000 utilizes advanced combustion systems that minimize NOx emissions, ensuring compliance with stringent environmental regulations. The dry low NOx (DLN) combustion technology is a critical aspect of the turbine, enabling clean operation without the need for water injection. This feature is particularly beneficial in regions where water scarcity is a concern.

The turbine is designed for flexibility, with a range of operational modes to accommodate different energy demands. It can rapidly respond to fluctuations in power demand, making it suitable for both baseload and peaking applications. This rapid load response is essential for integrating renewable energy sources into the grid, as it can adjust output quickly in response to variable generation.

Another significant characteristic of the GLC4000 is its advanced digital capabilities. The turbine is equipped with GE's Industrial Internet of Things (IIoT) technologies, which enable real-time data monitoring and analytics. These features enhance predictive maintenance, optimize performance, and maximize uptime, ensuring that power plants utilizing the GLC4000 can operate at peak efficiency.

Moreover, the modular design of the GLC4000 simplifies maintenance processes and allows for ease of upgrades as technology evolves. This adaptability ensures that plants can maintain performance over time without extensive downtime for retrofitting.

The GE GLC4000 gas turbine is a remarkable tool in the energy sector, combining high efficiency, low emissions, and advanced technologies. Its design and functionality make it a preferred choice for power producers looking to balance economic and environmental considerations effectively. As the demand for cleaner energy solutions continues to grow, the GLC4000 remains at the forefront of innovation in power generation.