Safety Instructions
Operating Instructions
Troubleshooting Tips
Consumer Support
Loading the dishwasher racks.
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets may vary from your model.
Upper Rack
Although the upper rack is for glasses, cups and saucers, pots and pans can be placed in this rack for effective cleaning. Cups and glasses fit best along the sides. This is also a secure place for
The upper rack is good for all kinds of
Secure larger
Make sure small plastic items are secure so they can’t fall onto the heater.
Be sure that items do not protrude through the bottom of the rack and block rotation of the middle spray arm. This could result in poor wash performance for items in the upper rack.
Check to make sure that tall items will not block rotation of the top wash arm.
The Wash Tower
Keep the center area clear in the lower rack.
The wash tower rises through the center of the lower rack during the wash and rinse portions of the cycle. The wash tower shoots water into the
Don’t block or load tall things next to the Wash Tower.
Lower Rack
When loading the lower rack, do not load large platters or trays in the front right corner.
They may prevent detergent from circulating during the wash cycle.
The lower rack is best used for plates, saucers and cookware. Large items such as broiler pans and racks should go along the
Also, be careful not to let a portion of an item such as a pot or dish handle extend through the bottom rack. This could block the wash arm and result in poor wash performance.
8