Greenheck Fan APEX-200 warranty Rail Mounting, Weatherhoods, Dampers

Page 5

Installation

Rail Mounting

Rail Layout

•Rails designed to handle the weight of the APEX should be positioned as shown on the diagrams below (rails by others).

•Make sure that rail positioning does not interfere with the supply air discharge opening or the exhaust air intake opening on the APEX unit (see FIGURE 6).

•Rails should run the width of the unit and extend beyond the unit a minimum of 12 inches on each side (see FIGURE 5).

•Set unit on rails.

Outdoor

Air

Intake

Hood

Exhaust Air

Discharge Hood

EXHAUST

INLET

OPENING

SUPPLY

DISCHARGE

OPENING

7.00

52.00

118.00

160.00

FIGURE 5: Isometric view of APEX on rails.

FIGURE 6: Side view of APEX on rails.

Weatherhoods

Supply weatherhood will be factory mounted. There are two exhaust weather hoods shipped separately as a kit with instructions on how to mount (refer to Page 7 for hood locations).

Dampers

Backdraft dampers are always included as an integral part of the exhaust hood assemblies. Motorized outdoor air and exhaust air dampers are optional and are factory mounted (and wired) at the inlet.

An optional motorized damper is also available for recirculation mode. This damper allows 100% recirculation of exhaust air through the coils for continued tempering of the space during unoccupied mode (i.e. no outdoor air being brought in). This damper is mounted and wired at the factory.

5®

Page 4 Page 6
Image 5
Page 4 Page 6
Contents INSTALLATION, OPERATION, & Maintenance Manual Storage Table of ContentsLifting InstallationBasic Unit Operation Roof Curb Mounting Unit Weights dry weightsRecommended Roof Openings Dampers Rail MountingWeatherhoods Typical Control Center Components Electrical ConnectionsDimensional Data / Access Door Descriptions Service Clearances / Access LocationsDirect Expansion DX Coils Coil Application RecommendationsWater Coils Variable Frequency Drive for Fans E7 Series by Yaskawa See page 13 for VFD on energy recovery wheelDrain Pan Traps Frost Control Application/Operation Testing refer to FigureTesting Modulating the Wheel Optional Accessories Remote Control Panel Special Tools Required Unit Start-UpPre-Start Check List Fan Performance Modifications Supply Fan Plenum TypeExhaust Fans Forward Curved Type Fan Belt Drives Belt Drive InstallationDirection of Fan Wheel Rotation Fan RPMVibration Energy Recovery WheelFan Belts Routine MaintenanceLubrication Bearings MotorsWheel & Fasteners Door Seal Maintenance External Filter MaintenanceInternal Filter Maintenance Winterizing Coils Coil MaintenanceAccessing Energy Recovery Wheel Cleaning Energy Recovery Wheel Segments Model Apex Parts ListBasic Unit Sequence of OperationSummer Operation Winter OperationTest and Balance Report Troubleshooting AirflowSymptom Possible Cause Corrective Action TroubleshootingGreenheck

APEX-200 specifications

The Greenheck Fan APEX-200 is a cutting-edge ventilation solution designed to meet the demands of modern commercial and industrial applications. Engineered with the latest technologies and featuring advanced design characteristics, the APEX-200 stands out for its efficiency, durability, and performance.

One of the prominent features of the APEX-200 is its energy-efficient operation. The unit is equipped with high-efficiency motors that not only reduce energy consumption but also provide optimal airflow, making it an ideal choice for organizations looking to lower their operational costs while maintaining superior performance. The APEX-200’s ability to operate at low sound levels adds to its appeal, allowing it to be installed in noise-sensitive environments without disturbing occupants.

The APEX-200 incorporates Greenheck's patented Aerodynamic Technology, which enhances airflow and minimizes turbulence. This technology ensures that the fan operates smoothly and efficiently, contributing to the overall effectiveness of the ventilation system. The innovative design of the fan blade and housing also plays a crucial role in maximizing performance while minimizing energy loss.

Durability is a key characteristic of the APEX-200. Constructed from high-quality materials, this fan is designed to withstand the rigors of demanding environments. The unit is also built to resist corrosion, ensuring longevity and reducing maintenance needs. This durability makes the APEX-200 suitable for a variety of applications, including manufacturing facilities, warehouses, and commercial kitchens.

Another significant aspect of the APEX-200 is its versatility. The fan is available in various sizes and configurations, allowing it to be tailored to specific project requirements. This flexibility makes it suitable for different airflow and pressure needs, ensuring optimal performance in diverse settings.

The APEX-200 also features advanced controls and monitoring capabilities. These systems can be integrated with building management systems to provide real-time data and insights into operational performance. Such features enhance user convenience and help facility managers optimize energy usage.

In conclusion, the Greenheck Fan APEX-200 is a sophisticated, reliable, and efficient solution for modern ventilation requirements. Its advanced technologies, high-efficiency operation, and durable construction make it an excellent choice for a wide range of applications, ensuring that it not only meets but exceeds the expectations of users in various industries.
Top Page Image Contents