Maytag W10321480A Connect Water Supply, Water Pressure, Reverse Osmosis Water Supply

Page 4

Water Pressure

A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. See “Water Filtration System.”

If you have questions about your water pressure, call a licensed, qualified plumber.

Connect Water Supply

Read all directions before you begin.

IMPORTANT: If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

Connect to Water Line

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Locate a ¹⁄₂" (1.27 cm) to 1¹⁄₄" (3.18 cm) vertical cold water pipe near the refrigerator.

IMPORTANT:

Make sure it is a cold water pipe.

Horizontal pipe will work, but drill on the top side of the pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.

4.Determine the length of copper tubing you need. Measure from the connection on the lower rear corner of refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a cordless drill, drill a ¹⁄₄" (6.35 mm) hole in the cold water pipe you have selected.

 

A

G

B

 

 

C

F E

D

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

D. Compression nut

 

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" (6.35 mm) drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so the washer makes a watertight seal. Do not overtighten, or you may crush the copper tubing.

7.Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw the compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

Connect to Refrigerator

Style 1

1.Unplug refrigerator or disconnect power.

2.Remove and discard the plastic part that is attached to the inlet of the water valve.

3.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

4.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

5.Turn shutoff valve ON.

6.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

 

A

 

B

 

C

 

D

 

E

A. Tube clamp

D. Compression nut

B. Tube clamp screw

E. Valve inlet

C. Copper tubing

 

7.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Style 2

1.Unplug refrigerator or disconnect power.

2.Remove and discard the black nylon plug from the gray water tube on the rear of the refrigerator.

3.If the gray water tube supplied with the refrigerator is not long enough, a ¹⁄₄" x ¹⁄₄" (6.35 mm x 6.35 mm) coupling is needed in order to connect the water tubing to an existing household water line. Thread the provided nut onto the coupling on the end of the copper tubing.

4

Image 4
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsBefore You Throw Away Your Old Refrigerator or Freezer Location Requirements Electrical RequirementsWater Supply Requirements Recommended Grounding MethodConnect Water Supply Water PressureReverse Osmosis Water Supply Connect to Water LineUsing the Controls Complete the InstallationTemperature Control Adjustment and Cooling On/Off Refrigerator USEConvertible Drawer Temperature Control Adjusting the ControlsAdditional Features Condition Temperature AdjustmentChilled Door Bin Crisper Humidity ControlWater and Ice Dispensers Units Default Minimum Maximum To Dispense Water Measured FillIce Dispenser To Dispense IceIce Maker and Storage Bin Water Filtration SystemCleaning To Clean Your RefrigeratorRefrigerator Care Changing the Light BulbsTroubleshooting Refrigerator OperationTemperature and Moisture Ice and WaterAccessories Stainless Steel Cleaner and PolishWater is leaking from the dispenser Dispenser water is not cool enough on some modelsWater Filter Certifications Performance Data Sheets Base Grille Water Filtration SystemBase Grille Water Filtration System Base Grille Water Filtration System Base Grille Water Filtration System Maytag Major Appliance Warranty Limited WarrantyItems Excluded from Warranty This limited warranty does not coverInstructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurInstructions Dinstallation Exigences demplacementDéballage du réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurMéthode recommandée de mise à la terre Spécifications électriquesSpécifications de l’alimentation en eau Pression de leauRaccordement à une canalisation d’eau Raccordement de la canalisation deauRaccordement au réfrigérateur Style Achever l’installation Utilisation des commandesUtilisation DU Réfrigérateur Ajustement des commandes Caractéristiques supplémentaires Condition Ajustement DE LA TempératureCommande de température dans Le tiroir convertible Commande du compartiment fraîcheur dans la porteDistributeurs d’eau et de glaçons Le distributeur deauDistribution deau remplissage mesuré Distribution deau standardUnités Par défaut Minimum Maximum Le distributeur de glaçons Distribution de glaceLa lampe du distributeur sur certains modèles Le verrouillage du distributeur sur certains modèlesPour retirer et réinstaller le bac à glaçons Remplacement du filtre à eauSystème de filtration de leau Mise en marche/arrêt de la machine à glaçonsRemplacement des ampoules d’éclairage Entretien DU RéfrigérateurNettoyage Nettoyage de votre réfrigérateurDépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eauAccessoires Le distributeur deau ne fonctionne pas correctementDe leau suinte du distributeur Nettoyant et poli pour acier inoxydableFeuilles DE Données SUR LA Performance Système de filtration deau de la grille de la baseSystème de filtration deau de la grille de la base 909 mg/L Mg/L ± 10 % 05 mg/L 97,4 Particules classe 4200 #/mL 1900 #/mL 99,9 Garantie DE Gros Appareil Ménager Maytag Garantie LimitéeÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage W10321480A SP PN W10321481A

W10321480A specifications

The Maytag W10321480A is a highly-regarded appliance that emphasizes efficiency and durability, making it a popular choice among consumers seeking reliability in their home environments. This model, primarily known for its use in dishwasher systems, showcases a unique blend of technology, design, and functionality that caters to modern household needs.

One of the standout features of the Maytag W10321480A is its robust construction. Designed with heavy-duty materials, it is engineered to handle daily wear and tear while maintaining optimal performance. This durability ensures that the appliance can withstand the rigors of a busy kitchen, making it ideal for families and those who frequently host gatherings.

The technology integrated into the W10321480A enhances its functionality significantly. It utilizes a powerful wash system that covers a wide cleaning range, ensuring that dishes come out spotless every time. With a focus on efficiency, this appliance is equipped with advanced washing cycles that adapt to the load's size and soil level. Users can choose from multiple settings, including a quick wash for lightly soiled items and an intensive scrub for tougher, baked-on food residues.

Energy efficiency is a key characteristic of the Maytag W10321480A. It complies with industry standards for energy consumption, contributing to lower utility bills and a reduced environmental impact. The dishwasher also operates with a quiet performance design, minimizing noise levels during cycles, which is especially beneficial for open-concept homes.

Another noteworthy feature is the advanced drying technology. The model incorporates a heated dry option that ensures dishes emerge completely dry, eliminating the need for towels and reducing the chances of water spots. Additionally, the stainless steel interior not only enhances durability but also aids in maintaining high sanitation levels, as it resists bacteria build-up.

In summary, the Maytag W10321480A exemplifies a blend of performance, efficiency, and user-friendly features. Its durable build, versatile wash cycles, energy efficiency, quiet operation, and superior drying capabilities make it an ideal choice for those looking for a reliable dishwasher. As a testament to Maytag's commitment to quality, this model continues to be an essential addition to the modern kitchen.