Sirius Satellite Radio SUBX1 manual Installation, Docking the Sirius Receiver

Installation

Docking the SIRIUS Receiver

If your receiver is a SIRIUS Plug and Play series ST or SV, you will need to install the Docking Adapter provided with the kit. Refer to Figure 1 and install the adapter into the front of the Boombox, positioning it behind the docking connector and against the backrest. Then slide the Lock button to the left to lock the adapter in the Boombox. The receiver may now be placed into the Boombox, pressing the receiver down until it is fully seated.

For other SIRIUS Plug and Play receivers, place the receiver into the Boombox, aligning the connector on the receiver with the connector on the boombox, and gently press the receiver down until it is fully seated in the dock. Then slide the Lock button to the left to lock the receiver in the Boombox.

LOCK

	LOCK
POWER	SOURCE
AUX IN	+

Figure 1

 [ Installation ]