Operation
Once the Boombox has been installed according to the installation directions, power on the Boombox by pressing the Power On/Off button on the front panel. The light on the front panel of the Boombox should light green to indicate the power is on. If the receiver does not power on at the same time, press the Power On/Off button on the receiver.
You should hear the SIRIUS audio. If you do not, adjust the volume of the Boombox by press- ing the Volume Up button on the front panel.
If you want to listen to an external audio device such as an MP3 player or CD player through the Boombox, do the following:
1.Initially set the volume level on the audio device to
2.Connect the output of the audio device to the AUX connection at the front of the Boom- box. Press the Source button to select the AUX input.
3.Adjust the volume on the audio device to obtain satisfactory audio output from the Boombox. If the sound is distorted, lower the volume level on the audio device.
If the light on the front panel should turn red while the Boombox is powered on, this indicates that the battery power is low. Replace the batteries.
[ Operation ] 13