Pecoware TBB-3000 owner manual Scheduled Replacement Parts List, Hydraulic OIL

SCHEDULED REPLACEMENT PARTS LIST

PLEASE NOTE: These are only recommended replacement times. The replacement times on the parts in this list will vary depending on the work environment and operating habits.

DESCRIPTION	PART #	HOURS	REQUIRED
BANDED KEVLAR DECK BELT	M0232	400	01
B SECTION KEVLAR PUMP BELT	M0260	500	01
BANDED KEVLAR DRIVE BELT	M0233	300	01
CUTTING BLADES	TBB-0190	016	08
CUTTING TEETH	TBB-0165	004	04
CUTTING BLADE SHCS	K0297	025	16
(3/8”-16 x 3/4”)
HAMMER MODULE	TBB-0137	300	04
HAMMER MODULE PIVOT BUSHING	TBB-0163	300	04
HAMMER MODULE WASHER	TBB-0178	300	04
HAMMER MODULE SHCS	K0298	300	04
(3/4”-10 x 2-1/4”)
HAMMER MODULE NYLOC NUT	K0302	300	04
(3/4”-10)
BLADE BAR	TBB-0135	600	02
BLADE BAR NYLOC NUT	K1247	600	10
(1/2”-13)
ZINGA HYDRO OIL FILTER	U0030	050	01
KOHLER ENGINE OIL FILTER	TBB-0239	200	01
(KOHLER# 1205001)
IGNITION SPARK PLUG	TBB-0236	200	01
(KOHLER# 1213202 RC12YC)
KOHLER PRE-CLEANER ELEMENT	TBB-0238	025	01
(KOHLER# 2408305)
KOHLER AIR CLEANER ELEMENT	TBB-0237	100	01
(KOHLER# 2408303)
KOHLER FUEL FILTER	TBB-0243	200	01
(KOHLER# 25 050 10S)

HYDRAULIC OIL

When replacing hydraulic fluid, the following grades and levels are approved for the Brush Blazer:

Mobil 1 Synthetic 5W-30, 10W-30, 15W-50

Amoco Ultimate 10W-40

Shell Gemini 10W-40, 15W-50

Helix Ultra 5W-40, 10W-40

Mobil Super HP 10W-40, 20W-50

Viscosity Oil 10W-40

Aero Shell 15W-50

The Brush Blazer comes equipped with Aero Shell 15W-50

29