Sirius Satellite Radio PMA8000-SR Swap Mode Switch from Com 1 to Com 2 remotely, Audio Selector

Page 25

PS Engineering

PMA8000-SR Audio Selector Panel and Intercom System

Installation and Operator’s Manual

Figure 3-2 PMA8000-SR Operating controls

NOTE: Placing the PMA8000-SR in–TEL–

The intercom mode pushbutton determines who is on the phone, and who is still on the intercom.

In ISO, only the pilot is on the phone, while the copilot and passengers remain on intercom. The pilot will continue to hear all selected aircraft radios.

In the ALL mode, everyone will be on the phone, intercom, and hear aircraft radios, and:

In Crew mode, the pilot and copilot will be on the phone and hear aircraft radios, while the passengers will be on intercom.

3.3.1Swap Mode (Switch from Com 1 to Com 2 remotely)

With a yoke mounted, momentary switch, the pilot can change from the current Com transceiver to the other by depressing this switch. To cancel "Swap Mode," the pilot may either press the yoke mounted switch again, or select a different Com with the XMT buttons. .

3.4Audio Selector (4)

Receiver audio is selected through seven momentary, push-button, backlit switches. You will always hear the audio from the transceiver that is selected for transmit.

The users can identify which receivers are selected by noting which of the green switch LEDs are lit. Push buttons labeled Nav 1, Nav 2, MKR (Marker), ADF and AUX (auxiliary) places those receivers into the audio stream. DME audio (if present) will come through when the AUX button is selected. When one of these buttons is pressed, the mode is active, and the LED will illuminate. Press the switch again and it will be "off" and remove that receiver from the audio output.

3.4.1Speaker Amplifier (5)

The "SPR" in the push-button section stands for speaker. This switch will place all selected audio on the cockpit speaker when this switch is selected. NOTE: Except for the unswitched audio, the speaker ampli- fier is not active in the "Split Mode”.

Unswitched audio input 1, (the input dedicated to autopilot disconnect, altimeter warning, etc.) will come through the speaker regardless of the speaker button position. Unswitched audio input 2, (the input dedi- cated to a lesser importance input such as GPS waypoint alert) will come through the speaker only when the SPR mode is on. Consult your installer for more information.

3.4.1.1 Public Address Initialization

When shipped from the factory, the Public Address function is inhibited. To initialize the PA function, you must have the Sirius Remote Control. Press 3 0 0 on the keypad to initialize the PA function. You will

200-880-0000

Page 3-2

Rev. 13, July 2006

Page 24 Page 26
Image 25
Page 24 Page 26
Contents PS Engineering, Inc PMA8000-SRMarker Beacon Installation Rev , July 12.2Introduction Section I General InformationTSO Approval. C50c, C35d Approval BasisDME, MKR, AUX Audio Selector SpecificationsRequired Test equipment to check installation PMA8000 Installation Kit Description Quantity Part NumberRecord your Radio ID here for future reference Equipment Installation Procedures Section II InstallationUnpacking and Preliminary Inspection Audio Panel Tray and Connector Assembly Audio Panel Mounting Rack InstallationConnector Pin crimping tools Cable Harness WiringPower Existing GMA340 InstallationCommunications Push-to-Talk Audio Panel interfaceTEL Duplex Function for Cell Phones Patented Swap ModeTransmit Interlock BacklightingPublic Address Mode Unswitched inputsIntercom wiring PA Mute J2, PinSirius Satellite Radio Functions Sirius Satellite Radio InstallationEntertainment distribution Sirius Radio Output JumpersPMA8000-SR using PXE7300 as control Entertainment muting PMA8000-SR using PAV80 as controlAdjustments Marker Beacon InstallationAudio Active Output Communications Antenna Installation NotesFunction PMA8000-SR Pin assignmentsSAT Radio output Lt Com 2 Mic KeyUnit Installation Post Installation CheckoutRequired Test Equipment Internal damage will resultMarker Beacon Checkout Sirius Signal DropoutTEL Checkout Sirius Satellite Radio checkoutInternal Recorder Checkout Optional Sirius Satellite Radio ID numberFinal Inspection Section III Operation Power Switch 1 EMG-Fail Safe OperationMicrophone 2 XMT Selection All models Audio Selector Swap Mode Switch from Com 1 to Com 2 remotelySpeaker Amplifier Public Address InitializationMute Button, Split Mode ICS Split ModePublic Address Function Intercom OperationMono headsets in Stereo Installation Intercom Volume ControlMic Muff Part Numbers Intercom ModesEntertainment Input Soft Mute and Soft Mute inhibit for Karaoke ModeIntercom Modes Capability when the cellphone is in use Telephone ModeSirius Satellite Radio Operation Sirius Radio Front Panel Controls Front panel control of Sirius RadioInternal Recorder System Option Marker Beacon OperationOperation Warranty Section IV- Warranty and ServiceFactory Service Appendix a Rev , July Appendix a External PTT Hook UpAppendix B Rev , July Appendix B PMA 8000 Installation DrawingsAntenna Coax Supplied Appendix C Rev , July Appendix C, J1 InterconnectAppendix D Rev , July Appendix D, J2 Connector InterconnectInstructions for Continuing Airworthiness, Audio System Instructions for FAA Form 337, Audio PanelsAppendix E Rev , July Conditions Section Conducted Tests Appendix F Rtca DO160D Environmental Qualification FormAppendix G Rev , July

PMA8000-SR specifications

The Sirius Satellite Radio PMA8000-SR is a renowned device that integrates advanced technology with user-friendly features, making it a staple for audio enthusiasts seeking a comprehensive satellite radio experience. As part of Sirius’ expanded offerings, the PMA8000-SR provides listeners with a robust selection of channels, ensuring there's something for everyone, from music and news to sports and entertainment.

One of the standout features of the PMA8000-SR is its ability to receive a vast array of satellite radio channels, offering over 150 options that cover a range of genres. This includes commercial-free music, exclusive talk shows, sports coverage, and even comedy channels. The device is designed to deliver high-quality audio, ensuring that listeners enjoy crystal-clear sound, free from the distortions often associated with traditional radio.

The PMA8000-SR incorporates digital signal processing technology which enhances audio clarity and ensures stable reception. With a user-friendly interface, the device allows users to easily navigate between channels and access key functions with minimal effort. The large display screen provides essential information at a glance, including channel names, song titles, and artists.

For in-car use, the PMA8000-SR features seamless integration with vehicles equipped for satellite radio, allowing for an uncomplicated installation process. The device supports multiple installation options, catering to various audio systems with both wired and wireless capabilities. The versatility of the PMA8000-SR ensures that it can be utilized in different environments, whether you're on a long road trip or relaxing at home.

Another notable characteristic is the built-in recording feature, allowing users to capture their favorite shows and music for later enjoyment. The device also includes pause and rewind functionalities, enabling listeners to take control of their audio experience without missing a beat. Additionally, with the compatibility for advanced features such as traffic and weather information, the PMA8000-SR goes beyond traditional radio limitations, providing real-time updates that help enhance driving convenience.

Overall, the Sirius Satellite Radio PMA8000-SR stands out due to its rich feature set, enhanced audio technologies, and exceptional versatility. It’s an ideal choice for those who crave a diverse audio experience with cutting-edge functionality, ensuring that listeners remain entertained wherever they go.
Top Page Image Contents