Fisher & Paykel OB60N8DTX Installation instructions, Electrical specifications

Page 8

6

Installation instructions

Electrical specifications

Electrical connection rating: 3.135 kW

Voltage/frequency: 220-240 V/ 50 Hz

Current: 16 A

Electrical connection

The appliance must be fitted correctly to guarantee electrical safety. During fitting and maintenance operations, the appliance must be disconnected from the electrical grid; fuses must be switched off or removed. The electrical connections are made before the appliance is installed in its housing. Ensure that:

the electrical installation has sufficient voltage, the electrical wires are in good condition,

the diameter of the wires complies with the installation requirements.

the oven is connected to a single phase 220-240 V 50 Hz supply using a 1.5 mm2 cable and connected to earth. The supply must be protected by a suitably rated circuit breaker in accordance with the installation regulations.

a suitable isolating switch providing full disconnection from the mains power supply is incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations. The isolating switch must be of an approved type and provide a 3 mm air gap contact separation in all poles (or in all active [phase] conductors if the local wiring rules allow for this variation of the requirements)

the isolating switch will be easily accessible to the customer with the oven installed.

Important!

The safety wire (green-yellow) is connected to the appliance’s terminal and must be connected to the earth terminal of the electrical set-up.

If the power cable is damaged, it should be replaced by the manufacturer, its after-sales service department or a similarly qualified person to avoid danger.

We cannot be held responsible for any accident resulting from inexistent, defective or incorrect earthing.

If the electrical installation in your residence requires any changes in order to hook up your appliance, call upon a professional electrician.

If the oven malfunctions in any way, disconnect it from the power supply or remove the fuse corresponding to the sector where the oven is hooked up.

Image 8
Contents User guide Page Contents Page Important safety instructions Safety and warningsImportant Safety Instructions Caring for the environmentChoice of location FittingElectrical connection Installation instructionsElectrical specifications Introduction to your oven Enamel tray Accessories suppliedShelf Control panel CD E FDisplay Child safetyTemperature/food weight Cooking time indicator Using your appliance Setting and adjusting the timeContrast adjustment Timer functionChild safety OperationInstant cooking Programmed cooking Cooking with delayed start and chosen cooking end time Programming automatic cooking time based on food weight Recipe functionUsing your appliance Oven cooking modes Traditional fan assisted Fan assisted grillTurbo plus Care and cleaning Cleaning the outer surfacesCleaning the inside of the door Disassembling the doorCare and cleaning Clac Troubleshooting Error codesFisher & Paykel Appliances Warranty and serviceBefore you call for service or assistance Page NZ AU GB IE