3
INTRODUCTION
Side Mounted Power | The two side mounted power outlets are internally | |
Outlets | fused with one 10 amp fuse. Care should be taken | |
(New Zealand Only) | not to overload them. | |
| If required the fuse can be repaired by following | |
| these steps: | |
| 1. | Turn the power to the oven off. Extra care |
|
| should be taken to make sure there is no power |
| 2. | to the oven before repairing the fuse. |
| Pull the oven out from the wall os the back is | |
|
| accessible and locate the fuse cover on the |
| 3. | |
| Using a Phillips style screwdriver, remove the | |
|
| screw holding the fuse cover in place and |
| 4. | remove the fuse cover. |
| Remove the fuse carrier from its base and | |
|
| replace the blown fuse wire with a new 10 amp |
|
| fuse wire. 10 amp is the maximum allowable |
| 5. | fuse wire that can be used in this fuse. |
| Refit the fuse and the fuse cover. | |
Accessories | Your Range will be supplied with some of the | |
| features/accessories listed depending on the model | |
| you have purchased. | |
| • | 1 Roast Dish |
| • | 1 or 2 Non Stick Bake Trays |
| • | 2 Oven Racks |
| • | 1 Grill Rack |
| • | Warmer Drawer or Storage Drawer |
Best cooking results are achieved using the accessories provided with your Range. Shiny/ aluminium trays will affect performance, particularly browning and cooking time.