Samsung AH68-01633B MP3 Encoding, Searching for Music/Voice Files, To change tracks during play

Page 13

MP3 Encoding

To move to other modes from LINE_ENC mode, refer to “Changing Mode”.

1 Connect the Audio Output port on the external audio source

(or the Line Out port) to the ENC port on the device with the Line cable.

2 Press and hold the REC button to start MP3 encoding.

If the button is pressed, encoding is paused and if the button is pressed again, the encoding resumes.

3 If the REC button is pressed during encoding, the encoding stops and an encoding file is created.

The files are encoded in the order of L001, L002....

and saved as MP3 file in LINE_ENC folder after encoding.

Note

- Bit Rates can be set within the range of 32Kbps~128Kbps. - Volume can be adjusted while monitoring the Encoding.

Notice

- Do not disconnect the Line cable during Encoding.

- If the battery is not sufficiently charged, the player will not completely encode the file. - Adjust the volume of the external audio source to a suitable level and encode it.

Searching for Music/Voice Files

To search for specific parts during play

Press and hold the joystick left or right during playback to search for

the part you want to listen to.

ENG

Release the joystick to resume play normally.

 

To change tracks during play

Press the joystick to the position briefly during playback to play the next track.

Press the joystick to the position briefly within 5 seconds after playback starts,

to move to and play the previous track. Press the joystick to the position briefly after five seconds to play the current track from the beginning.

To change tracks when stopped

Press the joystick left or right in stop mode to move to the previous/next track.

Note

-VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according to the type of sounds, such as their pitch, in the file.

-In the case of a VBR file, you cannot move to and play the previous track even if you press

the joystick to the position within 5 seconds after playback starts.

-Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.

24

If the volume level is too high, the sound quality may be poor.

25

Image 13 Samsung AH68-01633B manual MP3 Encoding, Searching for Music/Voice Files, To search for specific parts during play
Contents AH68-01633B Rev Contents Earphones Safety InstructionsAmbient operating conditions Environmental Information3D surround feature adds spaciousness to the sound FeaturesPlayer supports playback of MP3, WMA, ASF and Ogg Maximum data speed transfer of 18 MbpsYP-T6 H YP-T6 Z Components Location of Controls yeppInserting a Battery Location of Controls yepp Connecting the player to PCDisplay System RequirementsConnect the USB cable to the USB port on the computer Connecting yepp to PC with the USB cableHow to check USB driver Manual Installation of USB DriverWhen an error occurs during installation of the USB driver After selecting the driver WindowsDisconnecting the USB cable Using the removable storagePCDownloading/Uploading files FormattingTo View Help on yepp Studio Installing yepp StudioRun yepp Studio and press F1 Move the arrow to the top of yepp Studio and right click onPlaying Music Power On Turning Power On and OffPausing Music Power Off Adjusting the VolumeMP3 Encoding To change tracks when stoppedSearching for Music/Voice Files To search for specific parts during playMenu Options Loop RepeatingStarting Point Ending PointChanging Mode Using NavigationPress Button to enter Navigation mode Or press and hold Setting Playlist Setting PlaylistPlaying/Exiting Folder Playing PlaylistTo move to the mode you want and press Select Play Mode in SettingsSelecting the Playmode Button to selectPreset EQ Setting the EQ modeBass Booster WOW SetUser EQ Set DisplayScroll Speed Display TimeContrast BacklightTag LanguageDefault vol Default SetResume AboutEncoding Power Off TimeMenu Table Managing FilesDeleting Use the button to move and selectPlayer does not work and the LCD displays nothing TroubleshootingMemo Specifications