Testing operation

Installation instructions

the flexible hose is not longer than 2000 mm (or refer to applicable local regulations) and does not come into contact with sharp edges, corners, or moving parts, as these may cause abrasion. Use a single flexible hose only; never connect the appliance with more than one flexible hose. the flexible hose can easily be inspected along its entire length to check its condition; if it has an expiry date, it should be replaced before that date.

if using a flexible hose which is not entirely made of metal, make sure that it does not come into contact with any part of the cooktop with a surface temperature of 70oC or above (or refer to applicable local regulations).

the rigid pipe or flexible hose is replaced if it shows signs of damage.

the flexible hose is not subject to excessive heat by direct exposure to flue products or by contact with hot surfaces.

a gas pressure regulator, in compliance with the applicable local regulations, is installed when connecting to an LPG cylinder.

the socket into which the plug of the flexible hose fit is permanently attached to a firmly fixed gas installation pipe and is positioned so that the hose hangs freely downwards.

the plug of the flexible hose is accessible after installation, so that it can be disconnected for service or removal.

you inform the customer that the gas cylinder valve or the gas supply valve immediately by the cooker should be closed when the appliance is not in use.

you inform the customer that the rigid pipe or flexible hose should not be subjected to corrosion by cleaning agents.

After connecting the appliance to the gas supply, make sure that you

check the piping and connections using a soapy solution. The presence of bubbles indicated a leak. Tighten or replace connectons as appropriate, then recheck for leaks.

Important!

Do not use any naked flame to check for leaks.

check whether the injectors are correct for the type of gas being used. If not, follow the instructions under “Converting the cooktop to a different gas type”.

replace the sealing washer/s on the slightest sign of deformation or imperfection. The sealing washer/s is/are the part/s which guarantee/s a good seal in the gas connection.

The operation of the appliance MUST be tested before leaving. Turn on the gas and light each burner. Check for a well-defined blue flame without any yellow tipping. If any abnormailty is evident, check that the burner cap is located properly and the injector nipple is aligned correctly. Check the minimum burner setting by quickly rotating the burner knobs from the maximum

to the minimum position: the flame must not go out. If the adjustment is required, see section ‘Adjusting a burner’s minimum gas rate setting’ following.

If satisfactory performance cannot be obtained, check the installation and notify the local gas supply authority of a gas supply problem, or if it is an appliance problem, Customer Care should be called to obtain the nearest authorised Service Agent.

CG733 specifications

Fisher & Paykel CG733 is a distinguished gas cooktop designed to elevate your culinary experience. This model combines sophisticated design with advanced technology, catering to both professional chefs and home cooking enthusiasts.

One of the standout features of the CG733 is its powerful burners. It comes with a total of five gas burners, including a dual-flame burner that offers exceptional versatility. This dual-flame technology allows users to switch between high and low heat settings effortlessly, making it ideal for everything from rapid boiling to gentle simmering. Each burner has a robust BTU output, providing the necessary power for demanding cooking tasks.

The cooktop is equipped with a cutting-edge ignition system known as Pilotless Ignition. This feature enhances safety by eliminating the need for a standing pilot light, while ensuring that igniting the burners is as simple as turning the knob. Moreover, the CG733 incorporates a flame failure device that automatically shuts off the gas supply if the flame is accidentally extinguished, offering peace of mind in the kitchen.

Another important characteristic of the CG733 is its sleek and modern design. The cooktop features a minimalist look with stainless steel construction, providing durability while easily blending with various kitchen styles. The high-grade finish is not only aesthetically pleasing but also easy to clean, making maintenance straightforward.

Fisher & Paykel has also prioritized user comfort with the CG733 by incorporating ergonomic control knobs. These knobs are positioned for easy access and intuitive use, allowing for precise flame adjustment. Furthermore, the cooktop includes continuous grates made from cast iron, providing a stable cooking surface for pots and pans of all sizes. This design ensures smooth movement of cookware across the surface, reducing spills and enhancing convenience during meal preparation.

In terms of installation, the CG733 is designed for built-in configurations, allowing for seamless integration into your kitchen layout. With its combination of powerful performance, modern safety features, and elegant design, the Fisher & Paykel CG733 gas cooktop is an excellent choice for anyone looking to enhance their cooking capabilities while adding a touch of style to their kitchen space. Whether you're sautéing vegetables, searing meats, or simmering sauces, this cooktop is designed to meet all your cooking needs with precision and ease.