Activating the Song S-Seek Alert | Sirius Satellite Radio 10

Activating the Song (S-Seek) Alert

1.Press and hold the MEMO button for 2 seconds to enter the S-Seek Mode.

2.Press and Release the SELECT Button. A pop-up screen displaying two selectable options - “Delete” and “S-Seek”will appear (below left).

3.Use the CHANNEL Button to highlight the “S- Seek” option.

4.Press and release the SELECT Button and an S- Seek confirmation screen will appear. Select the “ On“” option using the CHANNEL Button and press the SELECT Button to confirm (below right).

Each time the CRSR-10 is turned on, it automatically searches the incoming signal to determine if a match exists between the signal and the currently saved information stored in the CRSR-10 memory. If one or more matches are found, a pop-up screen momentarily appears for 2-seconds and displays “S-Seek”.

An audible beep tone will be heard indicating that a match has been found. The display then reverts to the S-Seek Alert screen which displays the current matches. You can now select the Artist/ Song Title that you wish to listen to. No stored match alert is provided for the currently selected channel. To ensure that no duplicate entries are stored in memory, the CRSR-10 will check the stored input data to ensure the information about to be stored is not already in memory.

•If one or more matches are found, a display list appears (below), and allows you to scroll through the list of songs using the CHANNEL Button. Once a song is found, it can be selected by pressing the SELECT Button, and the display will revert to either selected display modes.

•If a selection is not chosen within 10 seconds after the last action, the screen will revert to the previously selected display and tuning mode.

Menu Display Options

To enter the Menu Options page, press and release the MENU Button. The “Menu Options” list will appear on the display (below).

Using the CHANNEL Button, highlight the option you wish to adjust and press the SELECT Button. The following options are available:

Sirius ID		Audio Level
Display Settings		Antenna Aiming
FM Transmitter		Memory Options
Channel Add/Skip		Time Features
Lock Options		Factory Default

Note: If a button is not pressed within 10 seconds, the Receiver will exit the “Menu Options” function and reverts back to the Default Screen display.

Sirius ID

Displays your 12-digit Sirius ID (SID) number. The SID is unique to every CRSR-10 and is required to activate your service. It is recommended that you write this number in the space provided on the last page of this user guide. No adjustments are allowed in this mode. To exit this option, press the SELECT Button or MENU Button.

20
	Sanyo CRSR-10 User Guide

	21
Sanyo CRSR-10 User Guide