Memory Options, Time Features | Sirius Satellite Radio 10 manual

Memory Options

In this mode, the user can turn the Memory Search Function (S-SEEK) On or Off. In addition, all 20 Preset Memory Locations can be cleared. To change the Memory Options, use the following procedure while in the “Menu Options” List mode:

1. Use the CHANNEL Button to highlight the			b. Clear All: Press and release the SELECT
“Memory Options”. Press the SELECT Button to			Button; a prompt display screen appears
select.			confirming - Clear All (Below). Select “Yes” or
			“No” and press the SELECT Button.
			“No” and press the SELECT Button.

Time Features

This Menu Option allows for adjustments of the

following items:
Clock	Auto Shutdown
Alarm Clock	Sleep Mode
Program Alert

To change the Time Features, use the following procedure while in the “Menu Options” List mode:

1.	Use the CHANNEL Button to highlight the “Time
	Features”. Press the SELECT Button to select.
2.	Use the CHANNEL Button to select one of the
	following Time Features to adjust:
	a. Clock: When entering this menu option, you can
	setup the clock shown on the default display,

• Time Zone: Since the Clock adjusts the

time automatically, it is important to specify

your proper time zone. Use the CHANNEL

Button to select the proper time zone. The

following is a list of time zones included:

(GMT -9:00) Alaska

(GMT -8:00) Pacific

(GMT -7:00) Mountain

(GMT -6:00) Central

(GMT -5:00) Eastern

(GMT -4:00) Atlantic

(GMT -3:30) Newfoundland (Abbreviated

as Newfndlnd)

• Daylight Saving Time (DST) Observance:

Activate this function if your area is subject

to DST; press the CHANNEL Button to

toggle between DST Observed (default) or

2.Select one of the following Memory Options:

a.Auto Memory Search function - On or Off: Use the CHANNEL Button to select between the 2 options by highlighting the desired selection (TOP). Then press the SELECT Button to enter the option.

To exit this function, press the SELECT Button or MENU Button. No button activity for 10 seconds will also exit this function.

based on the format desired, and the time zone in

which you reside. The clock data is provided via

the Sirius Satellite data stream, and will update

based on the received signal.

• Format: The Clock Format option allows for

either 12 Hour (Default), or 24 Hour display

options. Use the CHANNEL Button to select the

desired format.

DST Not Observed.

b. Alarm Clock: When this menu option is

highlighted and selected, you will be able to

set the unit to turn on at a specific time. The

last selected channel prior to shutdown will

be present when the Alarm feature is

activated. Alarm appears on the first line of

28
	Sanyo CRSR-10 User Guide

	29
Sanyo CRSR-10 User Guide