Sirius Satellite Radio 10 manual Audio Jack Connection Options, Other Audio Connection Options

Use the CHANNEL Buttons to scroll through the list of available frequencies. Use the CAT. Buttons to scroll 5 lines at a time for faster Frequency search. Press the SELECT Button to choose the desired frequency.

Be sure to change your car or home stereo’s FM frequency to the same frequency as the CRSR-10.

To exit the FM Transmitter Options, simply push the MENU button.

Audio Jack Connection Options

If you would like to use the supplied Audio Jacks (shown below) instead of the built-in wireless FM Transmitter, you must first confirm that your car stereo has RCA jacks or a mini plug auxiliary input. If so, you may connect your CRSR-10 directly to your car’s stereo. Please consult a qualified dealer for install options.

Other Audio Connection Options

If your car stereo doesn’t have RCA Jacks, you may also purchase an optional “FM Switching Box”. Please consult a qualified dealer for details and install options.

Channel Add/Skip

You can add or skip new or unwanted channels while tuning. To activate the Channel Add/Skip perform the following procedure while in the “Menu Options” List mode:

1.Press the MENU Button. Use the CHANNEL Button to highlight the “ Channel Add/Skip” option. Press the SELECT Button to select.

2.Use the CHANNEL Button to select the channel you wish to add or skip (bottom left). Press the SELECT Button to select.

3.The word “Skip” will appear next to the selected channel (bottom right).

Note: You can repeat step 2 for as many channels you wish to add or skip.

Lock Options

The CRSR-10 has the ability to lock the use of any channel, or channels you do not want others to access without your permission. The locked channel will not appear when the user changes channels with the CHANNEL Button. When the user tries to access the locked channel using the Direct Tuning function, the “Enter Code” Screen will be displayed and the channel will not be accessed until the proper code is entered.

While in the “Menu Options” List mode, follow the steps below to lock a channel:

1.Use the CHANNEL Button to highlight the “Lock Options”. Press the SELECT Button to select.

2.Select “Lock/Unlock” from the Lock Options Menu (next page) and press the Select Button to select.

3.Use the CHANNEL Button to highlight the

channel you wish to lock. Press the SELECT Button to select (next page).

Note: You can repeat steps 2 and 3 for as many channels you wish to Lock.

24
	Sanyo CRSR-10 User Guide

	25
Sanyo CRSR-10 User Guide