Fisher & Paykel DS602I manual General Information, Preparation, DS02

Page 3

GENERAL INFORMATION

STEP 1.1 PREPARATION

NOTE TO THE INSTALLER

νBe sure to leave these instructions with the Customer.

νEnsure this appliance is properly grounded.

NOTE TO THE CONSUMER

νKeep these Installation Instructions with your Use & Care Manual for future

reference.

IMPORTANT

νRead these Instructions completely and carefully.

νObserve all governing Codes and Ordinances.

WARNING

νThese Instructions are intended as a guide only.

νIt is the responsibility of the plumber and electrician to ensure that each installation complies with all Codes and Ordinances.

νInstallation of this DishDrawer requires basic mechanical and electrical skills.

νThe installer is responsible for the DishDrawer installation.

Improper installation is not covered under the Express Warranty Form.

IMPORTANT

νAt the completion of the DishDrawer installation, the Installer must perform Final Checks as per Section 7 of these Installation Instructions.

νEnsure the DishDrawer enclosure is prepared for installation.

νRemove all packaging and materials supplied with the DishDrawer.

νIf you have any questions concerning the installation of this DishDrawer, contact:

Fisher & Paykel Customer Care Centre

27 Hubble

TOLL FREE 1-888-9-FNP USA

Irvine

TOLL FREE 1-888-9-367 872

CA 92618

Fax (949) 829 8699

USA

WWW.FISHERPAYKEL.COM

 

STEP 1.2 PRODUCT SPECIFICATIONS & CAVITY DIMENSIONS

Weight - Full

93lb (42kg) Prefinished

(Water pressure below 7 p.s.i. (50 kpa)

- Empty

62lb (28kg) Prefinished

may require the electronics to be

Electrical

110-120VAC

re-programmed by a Service Person

 

3 pin socket outlet

at the time of installation.)

Drying

Residual Heat &

 

 

 

Fan Assisted

 

 

Water Connection

Recommended Hot

 

 

 

140°F (60°C) Max.

 

 

Water Pressure

Maximum 139 p.s.i. (960 kpa)

 

 

Minimum 4.3 p.s.i. (30 kpa)

 

SECTION 1

WARNING

Before installing the DishDrawer, remove the house fuse or open the circuit breaker.

Ensure all water connections are turned OFF.

WARNING

The DishDrawer MUST be installed to allow for future removal from the enclosure if service is required.

Page DS_02

Image 3
Contents USA Single DishDrawer DS02 Product Specifications & Cavity DimensionsGeneral Information PreparationGrounding Instructions Plumbing Water SupplyDS03 DS04 Plumbing Drainage OptionsProduct Parts Additional Product Parts for Integrated DishdrawerDS05 Fitting the Dishdrawer Dishdrawer Mounting Hole LocationsDS06 DS07 Connecting the ServicesDS08 DS09 Flexible Extrusion Attachment for 24 610mm CavityRefer to .1 Installation Wet Test Inserting Dishdrawer Into CavityDS10 DS11 Integrated Drawer Front DimensionsDS12 Drawer Front Air Flow ChamferDS13 Control Badge PositionDS14 Drawer Front Mounting Bracket Nut HolesAssembling the Integrated Badge Disassembling the Integrated Badge AssemblyDS16 DS17 StepDS18 Final Fitting for Single DishdrawerDS19 Installation WET TestTroubleshooting Final Checks

DS602I specifications

The Fisher & Paykel DS602I is an innovative appliance designed to elevate your kitchen experience with its range of advanced features and technologies. This built-in dishwasher exemplifies a blend of functionality, efficiency, and sleek design, making it a coveted addition to modern households.

One of the main features of the DS602I is its generous capacity, accommodating up to 15 place settings. This makes it ideal for larger families or those who often entertain guests. The interior is versatile, equipped with adjustable and removable racks that allow users to configure the space according to their specific needs. The dish drawer system ensures easy loading and unloading, while maintaining the elegance of a fully-integrated appliance.

The DS602I is powered by advanced wash technology, featuring SmartDrive technology that automatically adjusts the wash cycle based on the size of the load. This ensures optimal water and energy efficiency. Its Eco wash option is particularly notable, as it provides a cost-effective solution while being gentle on the environment.

In addition to being energy efficient, the dishwasher includes several wash programs tailored to various needs. From intensive cycles for heavily soiled pots and pans to delicate cycles for fragile glassware, the DS602I adapts to the demands of your kitchen. The quiet operation is a significant advantage as well, producing only 44 decibels during cycles, allowing you to maintain a peaceful ambiance at home.

Another characteristic that sets the Fisher & Paykel DS602I apart is its cutting-edge rinse aid dispenser and multi-level wash system, which guarantees a thorough clean. The stainless steel interior aids in hygiene and durability, while the front panel is customizable to match the cabinetry of your kitchen, ensuring a seamless aesthetic.

The intuitive user interface simplifies operation, with straightforward controls that allow for easy selection of wash cycles and options. Additionally, a delay start function can be set to run at a more convenient time, enhancing the flexibility of use.

In summary, the Fisher & Paykel DS602I is an exemplary built-in dishwasher that combines capacity, advanced wash technology, energy efficiency, and a sleek design. Ideal for the modern kitchen, it simplifies the dishwashing process while ensuring impeccable cleaning results. Whether you’re managing day-to-day dishes or preparing for a dinner party, this dishwasher is equipped to handle the challenges of any kitchen with ease and style.