ADJUSTING THE HEIGHT OF THE UPPER RACK
You can adjust the height of the upper rack in your Samsung dishwasher so that the lower rack can accommodate larger sized dishes. Depending on where you set the upper rack height, the lower rack can accommodate plates up to 14 in. (36cm) in diameter and the upper rack can accommodated plates up to 12 in. (30cm) in diameter.
DMT800 Series |
|
1. To lower the upper rack by 2 in. (5 cm), press |
|
the ‘A’ levers located at the left and right | A |
sides of the upper rack and push the upper |
|
rack downwards slightly at the same time. |
|
2. To raise the upper rack, just pull the upper rack upwards without operating any levers. The levers will latch and the upper rack will move to the high position.
We recommend adjusting the height of the
CAUTION upper rack before loading dishes into the rack. If you adjust the the rack after loading
the dishes, you may damage the dishes.
REMOVING THE UPPER RACK
Pull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards the front. See the illustrations below.
While the upper rack is removable, it must be installed for the dishwasher to operate properly.
CAUTION If you attempt to operate the dishwasher without the rack, noise will occur and the dishwasher will perform poorly.
02 using your dishwasher
Step 1. | Step 2. | Step 3. |
Using the spread nozzle instead of the upper rack
You can use the extra spread nozzle instead of the upper rack when you wash tall items such as oven’s tray in the lower rack. Remove the upper rack, insert the extra spread nozzle to the middle of duct nozzle, and load tall items in the lower rack.
Insert the spread nozzle into the middle outlet of duct | 1 | |
nozzle and turn the spread nozzle clockwise to lock. | ||
| ||
Refer to the illustration to the right. |
|
2
using your dishwasher _15