Adjusting the height of the upper rack
This Samsung dishwasher uses a rack able to accommodate larger sized plates. By adjusting the height of the upper rack, you can make room for different size dishes. You can place dinner plates with a diameter of 14 in. (36 cm) into the lower rack and plates up to 12 in. (30 cm) in diameter into the upper rack.
DMT300 Series
To adjust the height of the upper rack, follow these steps:
1.Remove the upper rack following the directions in Removing the Upper Rack below.
2.If you want to lower the upper rack,
Figure A to the right.
3. If you want to raise the upper rack, re-install the rack as shown in Figure B to the right.
We recommend adjusting the height of the upper rack before loading
CAUTION dishes into the rack, as the dishes may be damaged.
02 using your dishwasher
Removing the upper rack
To remove the upper rack:
Pull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards the front as shown in figures below.
While the upper rack is removable, it must be installed for the dishwasher to operate properly.
CAUTION If you attempt to operate the dishwasher without the rack, the dishwasher will be noisy and perform poorly.
using your dishwasher _15