Information codes

Information codes are displayed to help you better understand what is occurring with your dishwasher. If your dishwasher have any problem, below CODE SYMBOL light(s) is(are) blinked.

If you see any of the codes below, select the Cancel and Drain option, and then follow the directions under Solution.

CODE SYMBOL	MEANING	SOLUTION
	Temperature Sensor
	error
	Heater error	Functional error. With the dishwasher empty, add
	Heater error	detergent, and then run a cycle.
		detergent, and then run a cycle.
		If the problem continues, go to your house circuit
	High temperature	breaker panel, set the dishwasher’s circuit breaker
	High temperature	switch to off, and then contact an authorized
	Heating error.	Samsung service center.
	Low-level water error
		Check whether the water supply valve is closed, the
		water supply is suspended or the water inlet valve or
	Water supply error	line is frozen or clogged by foreign particles.
	Water supply error	If the problem continues, close the water supply
		If the problem continues, close the water supply
		valve, and then contact an authorized Samsung
		service center.
	High temperature	Check the temperature of the supplied water. If it
	High temperature	is higher than 176 ˚F (80 ˚C), a functional error may
	Water supply error	is higher than 176 ˚F (80 ˚C), a functional error may
	Water supply error	occur with the dishwasher.
		occur with the dishwasher.
		Check whether the drain hose is clogged or folded. If
	Drain error	the problem continues, close the water supply valve,
	Drain error	and then contact an authorized Samsung service
		and then contact an authorized Samsung service
		center.
	Over-level water error	Functional error. Close the water supply valve and
		Functional error. Close the water supply valve and
		go to your house circuit breaker panel, set the
		dishwasher’s circuit breaker switch to off, and then
	Leakage error	contact an authorized Samsung service center.
	Leakage error
		Functional error. Turn off the dishwasher and try to
	Button error	start it again.
	Button error	If the problem continues, contact an authorized
		If the problem continues, contact an authorized
		Samsung service center.
		Functional error. Make sure to close the door
	Door open warning	properly. If the problem continues, contact an
		authorized Samsung service center.

For any codes not listed above, call 1-800-SAMSUNG (1-800-726-7864).

05 troubleshooting

troubleshooting _25

Information codes

CODE SYMBOL

MEANING

SOLUTION

Heating error.

Samsung service center.

Low-level water error