GE ZIS420NX dimensions Top View, Door Swing Factory setting Scale

ZIS420NX

GE Monogram® 42" Built-In Side-by-Side Refrigerator

Dimensions and Installation Information (in inches)

Advance Planning for Built-In Custom Side-by-Side Refrigerators

Use this page to determine door swing interaction with adjacent cabinets

or countertops.

Refrigerator

Frameless Cabinets: The case trim overlaps cabinets at the top and sides. Therefore, frameless cabinets may require filler strips to prevent interference with cabinet door swing. The opening must allow for filler strips.

23-7/8" From

Rear of

Refrigerator

Top View

130° Door Swing (Factory setting) Scale 1:1

IMPORTANT NOTE –

FOR DISPENSER MODELS

Dispenser models are supplied with two dispenser trims, one to fit framed panels and one for overlay panels.

Dispenser trim fit to the custom panel depends on correct

panel thickness. Framed panels must be 1/4" nominal. Overlay panels should be constructed as shown

to accomplish a total 1.100" thickness.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Case	1"	2"	3"
	3/4"	1-3/4"	2-3/4"
Trim
	1/2"	1-1/2"	2-1/2"
	1/4"	1-1/4"	2-1/4"

1/4"

1/2"

3/4"

1"

1/4"	1/2"
		3/4"
		1"

Door	1-1/4"
	3/4" Overlay
	Panel
	(Nominal Size)

Listed by

Underwriters

Laboratories

Specification Revised 11/08 110166