ZIS420NX
GE Monogram® 42" Built-In Side-by-Side Refrigerator
Dimensions and Installation Information (in inches)
Refrigerator
Advance Planning for Built-In
Side-by-Side Refrigerators
Use this page to determine door swing interaction with adjacent cabinets
or countertops.
Frameless Cabinets: The case trim overlaps cabinets at the top and sides. Therefore, frameless cabinets may require filler strips
to prevent interference with cabinet door swing. The opening must allow for filler strips.
Top View
90° Door Swing (Optional setting) Scale 1:1
IMPORTANT NOTE –
FOR DISPENSER MODELS
Dispenser models are supplied with two dispenser trims, one to fit framed panels and one for overlay panels. Dispenser trim fit to the custom panel depends on correct panel
thickness. Framed panels must be 1/4" nominal.Door Overlay panels should be constructed as shown
to accomplish a total 1.100" thickness.
Case Trim
1/4"
1/2"
3/4"
1"
1/4"
1/2"
3/4"
1"
3/4" Overlay
Panel
(Nominal Size)
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 11/08 | 110166 |