Level Refrigerator, Alternate ANTI-TIP Procedure

Installation Instructions

STEP 5 LEVEL REFRIGERATOR

All models have 4-point leveling. The front is supported by leveling legs, the rear is supported by adjustable wheels. Both are accessible from the front of the refrigerator.

• To level the back of the refrigerator, turn the 7/16″ hex

nut located above the front wheels. Turn clockwise to

raise or counterclockwise to lower the refrigerator.

• For front leveling, use a 1-1/4″open-end wrench.

STEP 6 ALTERNATE ANTI-TIP

PROCEDURE

The refrigerator must be secured to prevent tipping.

The anti-tip brackets cannot be used on metal wall studs. Use this Alternate Procedure to secure the refrigerator against tip-over whenever metal wall studs are encountered and there is no soffit.

• Adjust height of refrigerator to match installation

cutout opening 83-1/2 to 84-1/2″. The refrigerator

should be level and plumb with cabinetry.

Hex Nut Adjusts

Rear Wheels

Leveling Leg

Top Case Trim

3/4"

Min.

Side View

Top Case Trim

CAUTION:

The rear leveling wheels and front leveling legs are limited to a maximum height adjustment of 1″. If the installation requires more than 84-1/2″height, the installer should elevate the refrigerator on a sheet of plywood or runners. Cabinetry trim could also be added across the top of the opening to shorten the opening. If you attempt to raise the refrigerator more than 1″, you will damage the front leveling legs and the rear leveling wheels.

PRUDENCE

Les roues de nivellement arrière et les pattes de nivellement avant permettent un réglage maximal de 25 mm (1 po). Si l’ouverture pour le réfrigérateur a une hauteur supérieure à 2,15 m (84-1/2 po), l’installateur doit élever le réfrigérateur sur une feuille de contre-plaqué ou des glissières. Il est également possible d’ajouter des baguettes de finition des placards sur le haut de l’ouverture afin de la réduire. Lever le réfrigérateur de plus de 25 mm (1 po) endommage les pattes de nivellement avant

et les roues de nivellement arrière.

Install Four

1-1/2" Drywall Screws

Through Trim and Into Soffit

or 3/4" Min. Wood Brace

•Raise the grille panel to access case trim.

•Use a 3/16″ bit to drill four evenly spaced clearance holes through the metal top case trim.

•Use a 1/16″ bit to drill to pilot holes through the metal

clearance holes and into the wood soffit. The holes should be centered in the soffit or a 3/4″ min. wood brace. The brace spanning the enclosure must be securely fastened to cabinets on both sides.

•Install four, 1-1/2″drywall screws into the pilot holes.

STEP 7 SECURE REFRIGERATOR

TO CABINETRY

Whenever possible, perform this step for anti-tip security, or when anti-tip brackets cannot be used. The refrigerator must be secured to prevent tipping.

•Raise the grille panel to access case trim.

•Drill hole in trim and drive screw through the trim into adjacent cabinet.

•Follow the same procedure on the opposite side.

Drive Screws

Through Case Trim and Into

Adjacent Cabinets

49-60468-1 specifications

The GE 49-60468-1 is a high-quality component designed for a variety of applications within the electrical industry. Renowned for its reliability and performance, this product stands out in the marketplace due to its innovative features and robust characteristics.

One of the key features of the GE 49-60468-1 is its advanced durability. Built with premium materials, this component is engineered to withstand harsh environmental conditions, making it an ideal choice for both indoor and outdoor applications. Its resistance to temperature fluctuations and moisture ensures a long operational life, which is essential for industries where downtime can be costly.

The GE 49-60468-1 integrates cutting-edge technologies that enhance functionality and efficiency. For example, this component is designed with improved energy management capabilities, allowing users to optimize power consumption without compromising performance. This is particularly beneficial in settings where energy efficiency is a priority, such as in commercial buildings and manufacturing plants.

Another notable characteristic of the GE 49-60468-1 is its versatile compatibility with a wide range of systems and configurations. This flexibility allows it to be easily integrated into existing setups without the need for extensive modifications, reducing installation time and costs. Users appreciate this adaptability, as it enables them to implement the GE 49-60468-1 across various projects with minimal effort.

Safety is a crucial consideration in any electrical component, and the GE 49-60468-1 excels in this regard. The component incorporates advanced safety features that prevent overheating and electrical surges, safeguarding both the equipment and its users. This reliability contributes to the overall confidence in the product, making it a trusted choice among professionals in the field.

In summary, the GE 49-60468-1 is a standout component characterized by its durability, advanced energy management, versatile compatibility, and enhanced safety features. These attributes make it an invaluable asset for a range of applications, driving both efficiency and reliability. Whether for new installations or upgrades, the GE 49-60468-1 proves to be an excellent investment for those seeking high-performance solutions in the electrical industry.