GE 49-60468-1 Tools Required, Hardware Supplied, Materials Required, Flooring

Page 9

Installation Instructions

TOOLS REQUIRED

•Tinsnips to cut banding

•Stepladder

•Bucket

•Level

•Appliance Hand Truck

•Tubing cutter

•7/16″ open-end wrench

•#2 Phillips screwdriver

•Drill and appropriate bits

•5/16″, 7/16″ socket

•Safety glasses

•1-1/4″open end wrench

•Pliers

•1/4″ ratchet

HARDWARE SUPPLIED

•Water filter bypass plug

•Anti-Tip brackets

•1/4″ nut and ferrule

MATERIALS REQUIRED

•35″ long 2x4 for Anti-Tip support

•1/4″ copper water line tubing or GE SmartConnect™ Refrigerator Tubing kits

•Water shut-off valve

•Custom panels for fresh food door, freezer drawer and grille panel

•Screws to secure refrigerator to cabinetry.

•Stick-on hook and loop fastener strips for

1/4″ side panels

FLOORING

For proper installation, this refrigerator must be placed on a level surface of hard material that is at the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 1,200 lbs.

NOTE: Protect the finish of the flooring. Cut a large section of the cardboard carton and place under the refrigerator where you are working.

GROUNDING THE REFRIGERATOR

IMPORTANT—(Please read carefully)

FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard three-prong (grounding) wall receptacle to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.

DO NOT USE AN ADAPTER PLUG TO CONNECT THE REFRIGERATOR TO A 2-PRONG OUTLET.

DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Monogram.com Installation InstructionsBefore YOU Begin ContentsInstallation Space Dimensions and Clearances Top View Frameless Cabinets Refrigerator DoorCase trim overlaps Cabinets at the topCustomization Basics ″ Overlay Panel Dimensions ″ Framed Panel DimensionsIf you choose to install framed panels, they must be cut Piece of filler material or foam tape to improve the fitZUG2 Grille Panel Dimensions Depending on installation heightSide Panels Hardware Supplied Tools RequiredMaterials Required FlooringRemove Packaging Install Water LineRemove the four 7/16″ bolts securing the straps to the skid Slide carton off top of cabinetInstall ANTI-TIP Brackets Install Side PanelsSkip this step when not using an RO System Skip this step when not using side panelsLevel Refrigerator Alternate ANTI-TIP ProcedureSecure Refrigerator To Cabinetry Refrigerator must be secured to prevent tippingAdjust Door Swing Install Grille PanelRaise the grille panel to stop position Install door and drawer panels Install 1/4″ Framed PanelsCustom handles Install Overlay PanelsConnect Water Supply Connect PowerStart Icemaker Copper TubingInstall Toekick Page Page GE Consumer & Industrial Pub. No Part No D1145P001

49-60468-1 specifications

The GE 49-60468-1 is a high-quality component designed for a variety of applications within the electrical industry. Renowned for its reliability and performance, this product stands out in the marketplace due to its innovative features and robust characteristics.

One of the key features of the GE 49-60468-1 is its advanced durability. Built with premium materials, this component is engineered to withstand harsh environmental conditions, making it an ideal choice for both indoor and outdoor applications. Its resistance to temperature fluctuations and moisture ensures a long operational life, which is essential for industries where downtime can be costly.

The GE 49-60468-1 integrates cutting-edge technologies that enhance functionality and efficiency. For example, this component is designed with improved energy management capabilities, allowing users to optimize power consumption without compromising performance. This is particularly beneficial in settings where energy efficiency is a priority, such as in commercial buildings and manufacturing plants.

Another notable characteristic of the GE 49-60468-1 is its versatile compatibility with a wide range of systems and configurations. This flexibility allows it to be easily integrated into existing setups without the need for extensive modifications, reducing installation time and costs. Users appreciate this adaptability, as it enables them to implement the GE 49-60468-1 across various projects with minimal effort.

Safety is a crucial consideration in any electrical component, and the GE 49-60468-1 excels in this regard. The component incorporates advanced safety features that prevent overheating and electrical surges, safeguarding both the equipment and its users. This reliability contributes to the overall confidence in the product, making it a trusted choice among professionals in the field.

In summary, the GE 49-60468-1 is a standout component characterized by its durability, advanced energy management, versatile compatibility, and enhanced safety features. These attributes make it an invaluable asset for a range of applications, driving both efficiency and reliability. Whether for new installations or upgrades, the GE 49-60468-1 proves to be an excellent investment for those seeking high-performance solutions in the electrical industry.
Top Page Image Contents