GE 49-60468-1 installation instructions Before YOU Begin, Contents

Page 2

Safety Information

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT — Save these instructions

for local inspector’s use. Observe all governing codes and ordinances.

•Note to Installer — Be sure to leave these instructions with the Consumer.

•Note to Consumer — Keep these instructions with your Owner’s Manual for future reference.

WARNING:

This appliance must be properly grounded. See “Grounding the Refrigerator,” page 9.

AVERTISSEMENT

Cet appareil doit être correctement mis à la terre. Consulter « Mise à la terre du réfrigérateur », page 9.

If you received a damaged refrigerator, you should immediately contact your dealer or builder.

CAUTION:

Due to the weight and size of this refrigerator, and to reduce the risk of personal injury or damage to the product—THREE PEOPLE ARE REQUIRED FOR PROPER INSTALLATION.

PRUDENCE

Àcause du poids et de la taille de ce réfrigérator et pour réduire le risque de blessure et de dommages, IL FAUT TROIS PERSONNES POUR FAIRE L’INSTALLATION CORRECTEMENT.

Skill Level — Installation of this refrigerator requires basic mechanical, carpentry and plumbing skills. Proper installation is the responsibility of the installer. Product failure due to improper installation is not covered under the GE Appliance Warranty. See the Owner’s Manual for warranty information.

WARNING:

•These refrigerators are top-heavy and must be secured to prevent the possibility of tipping forward. Anti-Tip protection is required. See page 11 for details.

•Use this appliance only for its intended purpose.

•Immediately repair or replace electric service cords that become frayed or damaged.

•Unplug the refrigerator before cleaning or making repairs.

•Repairs should be made by a qualified service technician.

AVERTISSEMENT

•Ces réfrigérateurs sont lourds en haut et il faut

les arrimer pour éviter leur basculement. Il faut avoir un système de protection contre le renversement. Voir les détails page 11.

•Il ne faut utiliser cet appareil que pour l’utilisation appropriée.

•Réparer ou remplacer immédiatement tout cordon électrique effiloché ou endommagé.

•Il faut débrancher le réfrigérateur avant le nettoyage ou toute intervention.

•Les réparations doivent être faites par un technicien qualifié.

For Monogram local service in your area, call 1.800.444.1845.

For Monogram service in Canada, call 1.800.561.3344

For Monogram Parts and Accessories, call 1.800.626.2002.

www. monogram.com

CONTENTS

Planning Guide

 

Installation Instructions

 

Step 8, Adjust Door Swing

13

The Installation Space

3

Tools, Hardware, Materials

9

Dimensions and Clearances

3

Grounding the Refrigerator

9

Step 9, Install Grille Panel

13

130° Door Swing

4

Step 1, Remove Packaging

10

Step 10, Install Framed Panels

14

90° Door Swing

5

Step 2, Install Water Line

10

Step 10A, Install Overlay Panels

15

Customization Basics

6

Step 2A, RO Water Line

11

Step 11, Connect Water Supply

16

Panel Dimensions

7

Step 3, Install Side Panels

11

Step 12, Connect Power

16

Side Panels

8

Step 4, Install Anti-Tip Brackets

11

Step 13, Start Icemaker

16

ZUG2 Grille Panel Dimensions

8

Step 5, Level Refrigerator

12

Step 14, Install Toekick

17

 

 

Step 6, Alternate Anti-Tip Procedure....

12

 

 

 

 

Step 7, Secure Refrigerator to

 

 

 

 

 

Cabinetry

12

 

 

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Installation Instructions Monogram.comContents Before YOU BeginInstallation Space Dimensions and Clearances Top View Case trim overlaps Refrigerator DoorFrameless Cabinets Cabinets at the topCustomization Basics If you choose to install framed panels, they must be cut ″ Framed Panel Dimensions″ Overlay Panel Dimensions Piece of filler material or foam tape to improve the fitSide Panels ZUG2 Grille Panel DimensionsDepending on installation height Materials Required Tools RequiredHardware Supplied FlooringRemove the four 7/16″ bolts securing the straps to the skid Install Water LineRemove Packaging Slide carton off top of cabinetSkip this step when not using an RO System Install Side PanelsInstall ANTI-TIP Brackets Skip this step when not using side panelsSecure Refrigerator To Cabinetry Alternate ANTI-TIP ProcedureLevel Refrigerator Refrigerator must be secured to prevent tippingRaise the grille panel to stop position Adjust Door SwingInstall Grille Panel Install 1/4″ Framed Panels Install door and drawer panelsInstall Overlay Panels Custom handlesStart Icemaker Connect PowerConnect Water Supply Copper TubingInstall Toekick Page Page Pub. No Part No D1145P001 GE Consumer & Industrial

49-60468-1 specifications

The GE 49-60468-1 is a high-quality component designed for a variety of applications within the electrical industry. Renowned for its reliability and performance, this product stands out in the marketplace due to its innovative features and robust characteristics.

One of the key features of the GE 49-60468-1 is its advanced durability. Built with premium materials, this component is engineered to withstand harsh environmental conditions, making it an ideal choice for both indoor and outdoor applications. Its resistance to temperature fluctuations and moisture ensures a long operational life, which is essential for industries where downtime can be costly.

The GE 49-60468-1 integrates cutting-edge technologies that enhance functionality and efficiency. For example, this component is designed with improved energy management capabilities, allowing users to optimize power consumption without compromising performance. This is particularly beneficial in settings where energy efficiency is a priority, such as in commercial buildings and manufacturing plants.

Another notable characteristic of the GE 49-60468-1 is its versatile compatibility with a wide range of systems and configurations. This flexibility allows it to be easily integrated into existing setups without the need for extensive modifications, reducing installation time and costs. Users appreciate this adaptability, as it enables them to implement the GE 49-60468-1 across various projects with minimal effort.

Safety is a crucial consideration in any electrical component, and the GE 49-60468-1 excels in this regard. The component incorporates advanced safety features that prevent overheating and electrical surges, safeguarding both the equipment and its users. This reliability contributes to the overall confidence in the product, making it a trusted choice among professionals in the field.

In summary, the GE 49-60468-1 is a standout component characterized by its durability, advanced energy management, versatile compatibility, and enhanced safety features. These attributes make it an invaluable asset for a range of applications, driving both efficiency and reliability. Whether for new installations or upgrades, the GE 49-60468-1 proves to be an excellent investment for those seeking high-performance solutions in the electrical industry.
Top Page Image Contents