CARE AND CLEANING
OCCASIONAL COOK‘N’VENT® CARE
Approximately every six months, remove any food soil that may have collected behind the access panels. The 30" and 36" models have two removable access panels; the 45" model has 3 panels.
The access panels to the "clean out" area are beside the blower (cabinet installation) or duct transition (re-
mote blower installation). See illustration below. The electrical connection box above the clean out area must be accessible for electrical inspection or service only. DO NOT TOUCH OR CLEAN the electrical connec- tion box.
Intake
Data Plate
Cabinet Blower
Electrical
Connection
Box: DO NOT OPEN
"Clean Out" Area | 2 Access Panels |
| |
| (3 in 45") |
| Mounting Channel |
Wing Nuts
VTN600R CABINET BLOWER INSTALLATION AND ACCESS PANELS
TO REACH THE CLEAN OUT AREA
1.Unplug the electrical cord for the Cook‘n’Vent®.
2.Unscrew the wing nuts on the top of the access panels as illustrated above. Lift out mounting chan- nel and panels.
3.Avoid the electrical connection box above the ac- cess panels. Be careful when working around the metal framework of the" clean out" area as there may be sharp edges.
4.Wipe up any accumulated grease or food in the "clean out" area. Use a general household degreasing spray or cleaner. Rinse and dry.
5.Replace the access panels and mounting channel. Tighten the wing nuts securely.
6.Plug in the electrical cord for the Cook‘n’Vent®.
PAGE 6