Philips MZ7 CD Synchro Start Recording, One Touch Recording, Digital Recording via Digital Out

Page 21

Dubbing tapes (from tape deck 1 to tape deck 2)

1Press TAPE to select tape deck 2.

2Load the prerecorded tape into tape deck 1 and a blank tape into tape deck 2.

Make sure the tape in tape deck 1 has its full spool to the left.

3(For Tape Deck 2 only)

Press SIDE on the remote control to select the recording side.

4Press DUBBING NORMAL•FAST once for normal speed dubbing or twice (within 2 seconds) for high speed dubbing.

ªNORMAL” (normal speed) or “FAST” (high speed) will be displayed, followed by “DUBBING”.

ªThe HSD flag appears on the display

during high speed dubbing.

Dubbing will start immediately.

ªThe REC flag starts flashing. 5 Press STOP to stop dubbing.

Notes:

Only Œ mode is available during dubbing.

At the end of side A, flip the tapes to side B and repeat the procedure.

Dubbing of tapes is only possible from tape deck 1 to tape deck 2.

To ensure good dubbing, use tapes of the same length.

During high speed dubbing in Tape mode, the sound is reduced to a low volume.

You can listen to another source while dubbing.

CD Synchro Start Recording

During CD synchro start recording,

Do not fast forward/rewind your tape in tape deck 1.

Do not listen to another source.

1Press TAPE to select tape deck 2.

Load a blank tape into tape deck 2 with

the open side downward.

2Press SIDE on remote control to select the recording side.

3Press A. REV to select the playback mode ( Œ or ú ).

4Press 3 CDC.

You can program the tracks in the order you want them to be recorded (see Programming Tracks). If you do not, the tracks are recorded according to the

order on the selected disc.

5Press CD SYN to start recording. ª The REC flag starts flashing.

6Press STOP to stop recording CD playback.

One Touch Recording

For One Touch Recording, as soon as you press REC, the current source (3 CDC, TUNER or CDR/AUX) will be recorded on tape deck 2

1Load a blank tape in tape deck 2.

2Press REC to start recording. ª The REC flag starts flashing.

3Press STOP to stop recording.

Note:

When you press RECORD while in TAPE mode, "SELECT SOURCE" will be displayed. One Touch Recording is not possible in TAPE mode.

Digital Recording via Digital Out

For CD digital recording, please refer to the Instructions Manual of the CD Recorder, digital audio equipment, etc.

RECORDING

English

21

3139 116 19161

Image 21
Contents 3139 116 Mini Hi-Fi SystemHow to connect a plug Important notes for users in the U.K Mains plugCopyright in the U.K 225 Class Laser Product3139 116 Contents General Information Safety Information Rear Connections PreparationFM Wire Antenna Connection Remote ControlConnecting other AC Power SupplyAUX ControlsSeconds Controls on the system and remote controlPlay ƒ/ AB Disc 1 / Disc 2 / DiscTo stop the demonstration mode Demonstration modeTo start the demonstration mode Operating the SystemSwitching the system to standby mode Switching the system onDim Mode Volume AdjustmentFlat Digital ControlMusic Press Incredible Surround toPlaying a CD Loading the CD ChangerDisc Change Disc for playbackProgramming Tracks Selecting a desired trackReviewing the program Playing the programFor Easy SET feature, please refer to Tuning to radio stationsTuner DisplayedStoring Preset Stations Tuning to Preset Radio StationsReceiving RDS Radio Station To cancel News or TA function Setting the time with RDS clock Press CLOCK/TIMERRDS Clock Radio Station with RDSTape Playback TapeRewind/Fast Forward Loading a tapeDuring playback CDR/AUXRecording from other sources RecordingCD Synchro Start Recording One Touch RecordingDigital Recording via Digital Out Setting the Timer TimerSetting the Clock ClockTo switch off the Timer If the recording is active, the timer will be cancelledSleep only on remote control To switch off the sleep timerSpecifications SpecificationsTroubleshooting MaintenanceMaintenance CD Player OperationGeneral Tape Deck Operation