TIMER
•To exit without storing the setting, press STOP.
•At the preset time, the timer will be activated.
ª The selected source will be played.
Notes:
–During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.
–If the source selected is TUNER, the last tuned frequency will be switched on.
–If the source selected is CD, playback will begin with the first track of the last selected disc. If the CD trays are empty, the TUNER will be selected instead.
–If the source selected is TAPE, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead.
–If the recording is active, the timer will be cancelled.
To switch off the TIMER
1Press CLOCK/TIMER for more than 2 seconds (or TIMER on the remote control).
2Press STOP on the system to cancel the timer.
ªThe timer is now switched off.
ªThe display will show "OFF" and the TIMER flag disappears.
To start the TIMER again (for the same preset time and source)
1Press CLOCK/TIMER for more than 2 seconds (or TIMER on the remote control).
2Press CLOCK/TIMER again to store the start time.
ªThe timer is now switched on.
ªThe TIMER flag appears on the display.
SLEEP
Sleep (only on remote control) | English |
This feature allows you to select a length | |
of time after which the system will switch |
|
to the standby mode automatically. |
|
•Press SLEEP on the remote control repeatedly to select a period of time.
ªThe selections are as follows (time in minutes):
60 ª 45 ª 30 ª 15 ª OFF ª 60 …
ª“SLEEP XX” or “OFF” will be displayed. "XX" is the time in minutes.
•When you reach the desired length of time, stop pressing the SLEEP button.
ªAfter this amount of time passes, the system will switch to the standby mode.
To switch off the sleep timer
•Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY•ON button.
23