GE 1825 owner manual USE of Adapter Plugs

Page 6

Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong

(grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord.

Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

 

 

USE OF ADAPTER PLUGS

 

 

(Adapter plugs not permitted in Canada)

 

 

 

 

 

Because of potential safety hazards under certain conditions,

 

 

 

 

we strongly recommend against the use of an adapter plug.

 

 

However, if you must use an adapter, where local codes permit, a

 

 

temporary connection may be made to a properly grounded 2-prong

6

 

wall outlet by use of a UL-listed adapter available at most local

 

hardware stores.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents GE Appliances Staple sales slip or cancelled check here Congratulations You Are Now Part of the GE FamilyWrite the model and serial numbers here GE & You Service Partnership Read this ManualReview the Section on Safety Precautions InstructionsBefore You Throw Away Your Old Refrigerator or Freezer CFC DisposalUSE of Adapter Plugs REMEMBER… About the controls on the refrigerator Control Settings Power Saver SwitchHow To Test Temperatures Food StorageRearranging the Shelves Safety InformationAbout the refrigerator shelves and dishes Quick Serve SystemAbout the refrigerator bins Quick Store BinAbout the storage drawers Adjustable Humidity DrawersAdjustable Temperature Meat Drawer Fruit and Vegetable DrawersSnuggers About the additional featuresStorage Drawers To RemoveTwo-Position Freezer Shelf Condiment CaddyBeverage Rack Extra Freezer Shelf Bins on the Doors Can DispenserIcemaker Accessory Kit About the automatic icemakerAutomatic Icemaker on some models Ice Storage Bin About the ice and water dispenserTo Use the Dispenser To replaceWater Filter Accessory Important Facts About Your DispenserCare and cleaning of the refrigerator Press here to Cleaning the OutsideCleaning the Inside Troubleshooting Tips Customer ServiceUnder the Refrigerator Preparing for Vacation Light Bulb ReplacementBehind the Refrigerator Preparing to MovePreparing to install the refrigerator Refrigerator LocationClearances To adjust the rollers Rollers have 3 purposesInstalling the water line Before You BeginPower drill What You Will NeedInstall the Shutoff Valve Shut Off the Main Water SupplyRoute the Copper Tubing and Connect It to the Shutoff Valve Turn On the Water and Flush Out the TubingPlug In the Refrigerator Connect the Tubing to the RefrigeratorTurn the Water On at the Shutoff Valve Start the IcemakerWhen reversing the door swing on non-dispenser models Important NotesTools Required Before Removing the Doors Remove the Freezer Door on Non-Dispenser ModelsRemoving the doors Remove the Fresh Food Door Reversing the hardwareRemove the Freezer Door on Dispenser Models Transfer Bottom Hinge Bracket to the LeftTransfer Top Hinge to the Left Operating Instructions Safety InformationTransfer Center Hinge Bracket to the Left Transfer Door StopsInformation Operating Instructions Installation Reversing the door handlesTransfer Freezer Door Handle Plastic Washer Reversing the doors Rehang the Freezer Door on Dispenser ModelsNormal operating sounds Operate Before you call for service…Refrigerator does not Vibration or rattlingAutomatic icemaker Fresh food or freezerPackage is normal Does not workOdor/taste Power Saver settingIce cubes have Moisture forms onFreezer Door does not close Hot air from bottomOrange glow See RollersCustomer Service Customer Service Safety Information Next Four Years Consumer WarrantyFirst Year Terms and ConditionsGE Will Replace What GE Will Not CoverGE Answer Center In the U.S Service Telephone NumbersService Contracts In the U.S Canada, call

1825 specifications

The GE 1825 is a remarkable evolution in the world of gas turbine technology, produced by General Electric, a company renowned for its innovative engineering and commitment to power generation solutions. Launched as part of GE's 7FA series, the 1825 model has established itself as a pivotal asset for both industrial and utility applications.

One of the standout features of the GE 1825 is its design efficiency. Engineered to deliver a high output while ensuring low emissions, this gas turbine operates effectively in combined cycle settings, making it an ideal choice for power plants aiming to optimize their production capabilities. With a robust output capability of around 1825 megawatts, the turbine is well-suited for large-scale operations requiring reliable energy generation.

The GE 1825 employs advanced technologies to enhance its performance. The turbine incorporates sophisticated air-cooled components, which help maintain operational integrity at elevated temperatures. This design focuses on durability and longevity, minimizing the need for frequent maintenance. Moreover, the GE 1825 turbine utilizes a state-of-the-art combustion system that not only boosts its thermal efficiency but also reduces nitrogen oxide emissions, aligning with global environmental standards.

Another notable characteristic of the GE 1825 is its operational flexibility. This turbine can seamlessly adapt to various fuel sources, including natural gas, distillate oil, and other alternative fuels. Such versatility enables power plants to optimize their fuel consumption based on market conditions and availability, thus achieving better economic performance.

In terms of control technologies, the GE 1825 is equipped with advanced digital systems that facilitate real-time performance monitoring and predictive maintenance. This capability allows operators to maintain optimal performance levels while ensuring that potential issues are identified and addressed before they escalate into critical problems.

Ultimately, the GE 1825 gas turbine stands as a testament to General Electric's commitment to energy innovation, providing cutting-edge technologies, exceptional efficiency, and operational flexibility. With its high power output, reduced emissions, and advanced control systems, it plays a crucial role in the evolving landscape of power generation, meeting both economic and environmental challenges in today’s energy market.
Top Page Image Contents