GE 1825 About the automatic icemaker, Automatic Icemaker on some models, Icemaker Accessory Kit

Page 17

About the automatic icemaker.

A newly-installed refrigerator may take 8 to 12 hours to begin making ice.

Safety Information

Icemaker

Feeler arm

in the STOP

 

(up) position

Ice Storage Bin

Feeler arm in the

ON (down) position

Feeler arm in the

STOP (up) position

Automatic Icemaker (on some models)

The icemaker will produce eight cubes per cycle— approximately 100 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions.

If the refrigerator is operated before the water connection is made to the icemaker, keep the feeler arm in the STOP (up) position.

When the refrigerator has been connected to the water supply, move the feeler arm to the ON (down) position.

The icemaker will fill with water when it cools to freezing. A newly-installed refrigerator may take 8 to 12 hours to begin making ice cubes.

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the swing of the feeler arm.

It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy and taste stale.

Operating Instructions Installation Instructions Troubleshooting Tips

Feeler arm on the dispenser model.

Icemaker Accessory Kit

If your refrigerator did not already come equipped with an automatic icemaker, an icemaker accessory kit is available at extra cost. Check the back of the refrigerator for the specific icemaker kit needed for your model.

Customer Service

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents GE Appliances Write the model and serial numbers here Staple sales slip or cancelled check hereCongratulations You Are Now Part of the GE Family Review the Section on GE & You Service PartnershipRead this Manual Instructions Safety PrecautionsCFC Disposal Before You Throw Away Your Old Refrigerator or FreezerUSE of Adapter Plugs REMEMBER… About the controls on the refrigerator Power Saver Switch Control SettingsFood Storage How To Test TemperaturesAbout the refrigerator shelves and dishes Safety InformationRearranging the Shelves Quick Serve SystemQuick Store Bin About the refrigerator binsAdjustable Temperature Meat Drawer Adjustable Humidity DrawersAbout the storage drawers Fruit and Vegetable DrawersStorage Drawers About the additional featuresSnuggers To RemoveBeverage Rack Two-Position Freezer ShelfCondiment Caddy Can Dispenser Extra Freezer Shelf Bins on the DoorsAutomatic Icemaker on some models Icemaker Accessory KitAbout the automatic icemaker To Use the Dispenser About the ice and water dispenserIce Storage Bin To replaceImportant Facts About Your Dispenser Water Filter AccessoryPress here to Cleaning the Outside Care and cleaning of the refrigeratorUnder the Refrigerator Cleaning the InsideTroubleshooting Tips Customer Service Behind the Refrigerator Light Bulb ReplacementPreparing for Vacation Preparing to MoveClearances Preparing to install the refrigeratorRefrigerator Location Rollers have 3 purposes To adjust the rollersBefore You Begin Installing the water lineWhat You Will Need Power drillShut Off the Main Water Supply Install the Shutoff ValveTurn On the Water and Flush Out the Tubing Route the Copper Tubing and Connect It to the Shutoff ValveTurn the Water On at the Shutoff Valve Connect the Tubing to the RefrigeratorPlug In the Refrigerator Start the IcemakerTools Required When reversing the door swing on non-dispenser modelsImportant Notes Remove the Freezer Door on Non-Dispenser Models Before Removing the DoorsRemoving the doors Remove the Freezer Door on Dispenser Models Reversing the hardwareRemove the Fresh Food Door Transfer Bottom Hinge Bracket to the LeftTransfer Center Hinge Bracket to the Left Operating Instructions Safety InformationTransfer Top Hinge to the Left Transfer Door StopsTransfer Freezer Door Handle Information Operating Instructions InstallationReversing the door handles Plastic Washer Rehang the Freezer Door on Dispenser Models Reversing the doorsNormal operating sounds Refrigerator does not Before you call for service…Operate Vibration or rattlingPackage is normal Fresh food or freezerAutomatic icemaker Does not workIce cubes have Power Saver settingOdor/taste Moisture forms onOrange glow Hot air from bottomFreezer Door does not close See RollersCustomer Service Customer Service Safety Information First Year Consumer WarrantyNext Four Years Terms and ConditionsWhat GE Will Not Cover GE Will ReplaceService Contracts In the U.S Service Telephone NumbersGE Answer Center In the U.S Canada, call

1825 specifications

The GE 1825 is a remarkable evolution in the world of gas turbine technology, produced by General Electric, a company renowned for its innovative engineering and commitment to power generation solutions. Launched as part of GE's 7FA series, the 1825 model has established itself as a pivotal asset for both industrial and utility applications.

One of the standout features of the GE 1825 is its design efficiency. Engineered to deliver a high output while ensuring low emissions, this gas turbine operates effectively in combined cycle settings, making it an ideal choice for power plants aiming to optimize their production capabilities. With a robust output capability of around 1825 megawatts, the turbine is well-suited for large-scale operations requiring reliable energy generation.

The GE 1825 employs advanced technologies to enhance its performance. The turbine incorporates sophisticated air-cooled components, which help maintain operational integrity at elevated temperatures. This design focuses on durability and longevity, minimizing the need for frequent maintenance. Moreover, the GE 1825 turbine utilizes a state-of-the-art combustion system that not only boosts its thermal efficiency but also reduces nitrogen oxide emissions, aligning with global environmental standards.

Another notable characteristic of the GE 1825 is its operational flexibility. This turbine can seamlessly adapt to various fuel sources, including natural gas, distillate oil, and other alternative fuels. Such versatility enables power plants to optimize their fuel consumption based on market conditions and availability, thus achieving better economic performance.

In terms of control technologies, the GE 1825 is equipped with advanced digital systems that facilitate real-time performance monitoring and predictive maintenance. This capability allows operators to maintain optimal performance levels while ensuring that potential issues are identified and addressed before they escalate into critical problems.

Ultimately, the GE 1825 gas turbine stands as a testament to General Electric's commitment to energy innovation, providing cutting-edge technologies, exceptional efficiency, and operational flexibility. With its high power output, reduced emissions, and advanced control systems, it plays a crucial role in the evolving landscape of power generation, meeting both economic and environmental challenges in today’s energy market.
Top Page Image Contents