Samsung SRS620DW owner manual Secure the water line, Install the water filter

Page 31

INSTALLING THE WATER DISPENSER LINE

Connect the water line to the refrigerator.

- Remove the compressor cover of the refrigerator.	WATER LINE
- Remove the compressor cover of the refrigerator.
- Connect the water line to the valve, as shown in the figure.
- When connected, check if there is any leakage.
If any, repeat the connection.
- Reattach the compressor cover of the refrigerator.

CONNECTION NUT

COMPRESSOR COVER OF REFRIGERATOR

Secure the water line.

- Using clip ”A”, fix the water line to the wall (the back of refrigerator).
- When the water line is secure, make sure whether the
water line is not excessively bent, pinched or squashed.	CLIP A
Complete the installation of the water supply line.


- Power on the refrigerator and press the lever on the right of the
dispenser until water runs out through the water line and all air has been empty.	WATER LINE
- At this time, check for any possible leakages at the join point in the water line.


After securing the water line, move the refrigerator to the required location.
Once the refrigerator is in position, do not move possibly.

Install the water filter.

-As shown, separate the fixed cap in the refrigerator by rotating it counterclockwise.

Remove the water filter from the box and put a month indicator sticker on the filter as shown.

-Write the month you installed the filter on the label. EX) If the water filter was installed in March, put “MAR”

-Remove the protective cap then position and insert the filter as shown,

-Slowly turn the water filter clockwise 90º to align the indication mark on the

cover, locking the filter in postion. Do not overtighten.

SEPARATION

OF RED CAP

STICKER

(MONTH INDICATION)

COVER FILTER

ALIGN THE INDICATION MARK WITH LOCK POSITION.

INSTALLATION INSTRUCTIONS

CAUTION Please check if the indication line aligns with the lock position.

31

Image 31

Contents Side by Side Other Symbols Used Safety WarningsSafety Warning Manual Setting UP the RefrigeratorMajor Features ModelsBasic Model Dispenser Model Control PanelDispenser Model With CoolSelect Zone Basic Model With CoolSelect ZoneDigital Panel Power FreezeCold Water Temperature ControlIce Dispenser Water DispenserFill the tank up to the full level just over 4.2 litres When exposing to child, set the locking device to the LockFix the water supply device tightly into the fixing hole Set the locking device to the LockRecommended Water Tank / Supply DeviceBottles SizeShelves and Bins Plastics Drawer Food Storage GuideTempered Glass Shelf Door BinChilled Food Storage in Refrigerator Cool Select button OptionalSoft Freeze ChillThaw button Quick Cool button600 g Removing the Freezer Accessories Cleaning the Accessories Deodorizer optional Changing the Interior LightWater Filter Water Filter Indicator lightUsing the dispenser without the water filter Ordering replacement filtersIf not, the water supply line can be damaged Installation of the RefrigeratorChecking the Dimensions of your Entrance Door Selecting the Location for the RefrigeratorRemoving the Front Leg Cover Optional Removing the Front LEG CoverRemoving the Freezer Door Removing the Refrigerator DoorsRemoving the Refrigerator Door Reattaching the Freezer Door Reattaching the Refrigerator DoorsReattaching the Refrigerator Door Reattaching the Front Leg Cover Optional Reattaching the Water Tube OptionalDoors will be uneven if the refrigerator is not level Please level the refrigerator firstRefrigerator If the door of the freezer is lower than thatChecking the Parts Checking the Water Dispenser Line OptionalDo not overtighten the compression nut Connecting to water supply lineConnect the water line to the refrigerator Check the water supply lineSecure the water line Install the water filterConnect to the water supply line Warranty InformationConnect the water line to the refrigerator Check the amount of water supplied to the ice tray Remove any residual matter inside the water supply lineTroubleshooting Ambient Room Temperature Limits